Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Home » Emergency Sprinkler Repair » Sprinkler Repair in Oklahoma City, Lawton, Lawn Sprinkler Repair, Emergency Sprinkler Repair –

Sprinkler Repair in Oklahoma City, Lawton, Lawn Sprinkler Repair, Emergency Sprinkler Repair –

Oklahoma Drainage Systems and Sprinkler Repair

(405) 203 9419 We install all types of Residential Drains and Repair Sprinkler Systems

French Drain Installation

French Drain running from back yard to street

Checking us out!

  • 16,196 hits

RSS Drainage Systems and French Drains

  • French Drain Installation, Choctaw, Oklahoma City, Norman, Edmond June 3, 2020
    Oklahoma Drainage and Sprinkler Repair recently installed a French Drain along the edge and under a Stepping Stone walkway.  The Work took place In Choctaw East of Choctaw Road. Every time it rained, our customer had water standing on the walkway between the pool and the house.  Not only would the water stand there but […]
  • Norman Oklahoma French Drain Installation, Oklahoma City, Edmond, June 1, 2020
    Recently  Norman Oklahoma had 4 inches of rain in two hours.  That’s the most rain in a short time that I can remember.  Storm-Water runoff can cause damage to all types of property and buildings.  Water getting inside your house is never a good thing.  A Drainage System that utilizes a French Drain can help.  […]
  • French Drains, Sub-Surface Water, What you need to think about! May 31, 2020
    A “French Drain” Moves “surface water” away from a low lying problem drainage area.  Sub surface water is many times not considered or thought about when a drainage system is being installed.  People only think about what they can see and don’t think much about what they can’t see. Sub Surface water is water that […]
  • Oklahoma City French Drain information, pictures, and tips May 30, 2020
    Standing water can cause a lot of damage to your yard.  The above picture was from a French Drain Installation in Oklahoma City. Many times we wait until things dry out a bit before beginning a French Drain Installation.  Some times the water never goes away.  So we start digging in standing water and putting […]
  • French Drain Installation in Moore Oklahoma, Standing Water Problem Solved May 29, 2020
    Moore Oklahoma was the location of our most recent French Drain Installation.  Our customer had a problem that is very common.  Every time it rained, she had a large pond in her back yard.  Water stood there so long that her normally nice Bermuda Grass died out because it was under water so long.  Her […]
  • French Drain Pipe, What size do you need? Oklahoma City, Edmond, Moore, Norman May 25, 2020
    When installing a Drainage System of any type, a decision must be made on the size of Drain Pipe used.  Typically 6 inch, 4 inch, and 3 inch are the most common in Residential Drainage Systems.   If you have one or two 6 inch Surface Drains or a stretch of French Drain that is […]
  • French Drain Installation with not much “Fall” or Slope May 24, 2020
    French Drain Installation can be tricky sometimes.  Recently we installed a French Drain in Norman with very little “Fall”.  This means that the “Intake” For the Drainage System is close to the same level as the “Exit.”  Simply Put, it is hard to make a Drain work if it isn’t ” Down Hill,” to where […]
  • Sod Delivery and Installation, Oklahoma City, Edmond, Yukon, Lawton, Norman May 23, 2020
    Oklahoma Drainage and Sprinkler Repair Now is adding Sod Installation to our Drainage System Services and Lawn Sprinkler Repair. We install Fescue and Bermuda Sod by the “Pallet.”  Each Pallet provides roughly 450 square feet per pallet. In the above picture, we installed two pallets of Fescue.  It was unrolled in the back yard and […]
  • New French Drain in Oklahoma City, Oklahoma Drainage and Sprinkler Repair, Edmond, Norman, Lawton May 10, 2020
    A NEW FRENCH DRAIN IN OKLAHOMA CITY Recently we installed a large Drainage System in OKC.  It was a 4 inch System using 4 inch ADS French Drain Pipe with Soc and 4 inch ADS Solid Drain Pipe.  The “Intake” of the Drainage System had two parts.  Water from the gutters on the house was fed […]
  • French Drain Installation Mistakes, Problems, and bad practices. May 6, 2020
    Recently we installed a Drainage System in NE Edmond.  Our customer had purchased a new home at a large discount.  The new home had sat empty for three years because of all the drainage problems on the West side of the house in the front, side, and back yard.  The builder could not sell the […]

Oklahoma Drainage and Sprinkler Repair –  Expert Sprinkler Repair for all Residential Lawn Sprinkler Systems

Emergency Service – After hours and Weekends

We service all of Central and Western Oklahoma

Since 1993 we have:

Fixed leaking sprinkler pipes in Edmond

Replaced Sprinkler Valves in Norman

Adjusted Sprinkler Heads In Oklahoma City

Installed A New Back Flow Valve In Lawton 

and over 2000 other Sprinkler Repairs in Central and Western Oklahoma.

Sprinkler Repair in Oklahoma City.

Recently we spent an afternoon checking out a Sprinkler System in Northwest Oklahoma City.  The customer told us that many of the heads in the Sprinkler System had a variety of problems.  Her Sprinkler System was fairly large so the Sprinkler System Checkup would take some time.

Broken Sprinkler Head


First we had to run each Sprinkler Zone and look at each Sprinkler Head individually.  This took a while considering that there were 18 zones and 5 to 10 Sprinkler Heads in Each Zone.


First we looked to see if each Sprinkler Head was functioning correctly.  Many of the heads were leaking at the base. Other Sprinkler Heads were not spraying correctly and needed to have their Sprinkler Nozzles Replaced.  Some of the Sprinklers were just worn out and needed to be replaced.


As we went through the Sprinkler System, we placed a flag by each head that needed some type or Sprinkler Repair or Replacement.  Along the way we also checked Sprinkler Coverage.  Some Sprinkler Heads needed to be moved because some areas were either too dry or too wet.  Several Sprinkler Heads needed to be moved.

Sprinkler Nozzle


Before the end of the day, we replaced 12 Sprinkler Heads, Changed Out 35 Sprinkler Nozzles, and moved 11 sprinkler heads to new locations.

Norman Sprinkler Repair 

Recently we had a customer in Norman who had some trouble with a sprinkler head that was leaking at the base.  There was mulch all around the sprinkler head and when the system ran it blew mulch all over the sidewalk.  This is a typical Sprinkler Repair and occurs quite often.  It took us about 15 minutes to fix.  We also moved several Sprinkler Heads that weren’t in the best places.  Moving sprinkler heads is a common practice for Oklahoma Drainage and Sprinkler Repair.


Broken Sprinkler Head took about an hour to fix.

Sprinkler Repair is an ongoing issue for any sprinkler sy

Moving sprinkler valves also is a service that we provide.  It takes a lot more expertise and experience to move sprinkler valves.  There are many reasons that sprinkler valves and sprinkler heads may need to me moved.  Driveways can be added or new landscaping may be installed.  We can redesign any residential sprinkler system Moving Sprinkler Valves, Sprinkler Heads, Sprinkler Pipes, and Sprinkler Wiring is what it takes.

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We at Oklahoma Drainage and Sprinkler Repair, take great pride in the Sprinkler Repair Services that we provide.  In almost 27 years of service,We have solved virtually every Sprinkler Repair Problem possible.


We solve Sprinkler Repair Problems that other companies can’t handle.  If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call or send us an

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

The above are the most common problems that we deal with.




Sprinkler System Repair  Broken Sprinkler Heads — Sprinkler Controllers — Sprinkler Valves — All Brands

Servicing:  Oklahoma City — Norman — Moore — Edmond — Mustang — Yukon — Midwest City — Del City — Blanchard — Newcastle 


Now Servicing Western Oklahoma including Lawton and Altus.



Fixing Leaking Sprinkler Pipes is a common occurrence for Oklahoma Drainage and Sprinkler Repair.  Most recently we had a service call in Lawton.  We got a call from a lady who had water pouring out from under the edge of her driveway.  After shutting off the water at the back-flow valve, we were able to determine that the leak definitely was coming from the sprinkler system.  A cracked sprinkler pipe was the problem and to make matters worse, the sprinkler pipe ran under the driveway.

Oklahoma Drainage and Sprinkler Repair had the solution.  Instead of trying to fix the broken sprinkler pipe, it was a much better idea to replace the entire pipe.  The Sprinkler Repair took about three hours.

Oklahoma City Sprinkler Repair

Recently we helped some folks with their sprinkler controller.  They had a lightning strike melting their sprinkler controller and all the connecting wires. Changing the Sprinkler Controller took a little time, but the larger problem was changing out all the sprinkler wires that ran underground form the controller to the sprinkler valves.  This part took a while and required quite a bit of attention to detail.


The sprinkler valve in the picture was replaced by Oklahoma Drainage and Sprinkler Repair. When the Sprinkler Valves were originally installed, they were not put inside a “Valve Box” to protect them. The company that installed them just dumped dirt on them and got paid and left. The Sprinkler System ran ok for about two years before the sprinkler valves failed. We replaced the valves and added a valve box to protect them so this time the Rain Bird valves should last much longer. If you need help with your sprinkler system, give us a call at 405 203 9419. Oklahoma Drainage and Sprinkler Repair has been solving sprinkler problems since 1993.

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Do you need Sprinkler Repair?

Winter is a time when a lot can go wrong with a Sprinkler System.   Sprinkler Pipes can freeze and break.  Sprinkler heads can crack or bust.  Above Ground Back-Flow Valves can crack or leak even during a warm winter.  Oklahoma Drainage and Sprinkler Repair can help.  Give us a call at :

Sprinkler Controller Trouble Shooting

Having Installed Several Thousand Sprinkler Systems over the past several years, here are the most common mistakes made by homeowners who are not comfortable with their Sprinkler Controller.

Most Sprinkler Controllers have a knob or a digital touch screen.  Either way, the basic functions are the same.

1.  Sometimes some brands of Sprinkler Controllers won’t work because the ” Time and Date,” have not been set correctly.  If you select time/date and the screen is blank with no time or date then you have a problem.


2.  The most common reason that a Sprinkler Controller won’t work is because the breaker has been tripped for the electrical plug that the controller is plugged into.  People assume that because the LED screen on the controller has power that the controller is receiving power.  THIS IS NOT THE CASE!!!!!!!!!!!!!!!!  ALL CONTROLLERS HAVE BACKUP BATTERIES IN THEM TO MAINTAIN THE CONTROLLERS PROGRAMMING IF YOUR ELECTRICITY GOES OFF.  THE BREAKER CAN BE TRIPPED TO THE ELECTRICAL OUTLET AND THE DIGITAL DISPLAY WILL STILL RUN OFF THE BATTERY MAKING IT LOOK LIKE IT HAS POWER WHEN IT DOES NOT.



Another very common mistake is that people confuse “Start Times,” with “Run Times” on the controller.

A Run Time is how long you program each Sprinkler Zone to run.

(Zone 1  5 minutes, Zone 2 8 minutes, Zone 3 25 minutes and so on.)  You program how long you want each Sprinkler Zone to run.

A Start Time is a time that you set on the controller to start zone one running.  All other zones automatically follow zone one in order lowest to highest.  Zone 2 knows to always follow zone 1 when it is done.  Zone 3 knows to follow Zone 2 and so on.  Let me repeat this.  Start Times are only for zone 1.  Again, a “Start Time,” is a time that you would like your Sprinkler System to come and run through all the zones.

Sprinkler Controllers have the ability to run more than one start time.  This is to allow your entire Sprinkler System to run more than once in a 24 hour period.  You can have a Start Time of 1 PM.  Zone 1 comes on and runs until its programmed time elapses.  Zone 2 automatically comes on next and runs.  Then zone 3 and so on.  You might have a 2nd Start Time several hours later to start and run your entire system again.  (2nd start time at 8 PM)  The Sprinkler System has had plenty of time to run through all the zones when it started at 1 PM.  At 8 PM the controller turns zone 1 on again and all the zones run their programmed amount of time.  THE MISTAKE PEOPLE MAKE IS THINKING THAT YOU MUST PROGRAM A START TIME FOR EACH ZONE. ( YOU CAN NOT PROGRAM A START TIME FOR ZONE 2,3,4 etc.)  This is also apparent by the fact that most Sprinkler Controllers have a limit of 4 start times but can run more zones than 4.  Most Sprinkler Controllers can run 10 zones or more.

What causes a big problem is a when person programs a Start Time at 1Pm.  Thinking incorrectly that they need to program a Start Time for zone 2.  They enter a second Start Time for 1:15pm, and a third start time for zone 3 at 1:30 PM.  So here is what happens.  Say each zone is programmed to run for 10 minutes each.(Run Time)  Zone 1 comes on and runs at 1 PM.  At 1:10 PM Zone 1 stops and zone 2 comes on.  At 1:15 PM the second start time kicks in and tries to turn on zone 1 again while zone 2 has only been running for five minutes and the other subsequent zones have not run at all.  This is called an “Overlapping Start Time.”  With an Overlapping Start Time, Different brands of controllers do different things.  They are all bad regardless.  Some will run zone one over and over and over causing a flood.  Others will not run at all.

Most people only use or need one Start Time.


The “Water Budget Feature,” found on most controllers can cause problems with your Sprinkler Run Times.  Water Budget is a quick way to quickly change all your Run Times for all your zones at once.  Example  —  Out of the box, your new Sprinkler Controller will be set to 100%.  If you program zone 1 to run 10 minutes and zone 2 to run 15 minutes then if your water budget is 100% then that is exactly what they will run.  If you change your water budget from 100% to 200% now zone 1 will run 20 minutes and zone 2 will run 30 minutes and any other zone’s run time will run double of what it was programmed at 100%.  This is a great feature until you accidentally change your water budget to 900% and don’t realize it.  (or 5%)



Some of the older digital Sprinkler Controllers have an “Enter” button.  Any programming you do must be followed by hitting the Enter Button.  If you don’t hit it then programming that you think you keyed in is lost.  This is why the newer controllers don’t have an Enter Button.


Oklahoma Drainage and Sprinkler Repair has been solving all types of Sprinkler System Problems since 1993.

We provide:

1.  Sprinkler Valve Problems

2.  Sprinkler Wiring Problems

3.  Sprinkler Controller Problems / Sprinkler Clock Problems

4.  Sprinkler Head Problems

5.  Sprinkler Pipe Problems

6.  Sprinkler Coverage Problems

7.  Sprinkler Redesign Problems for new fences or swimming pools.


Many times sprinkler repair needs arise at inconvenient times. Water lines can break in the middle of the night.  Back-Flow Valves Freeze and break at night too.  Sometimes things go wrong when we are away from our homes as well.  Sprinkler Systems coming on at the scheduled times but not shutting off is common and has several possible causes.  Sprinkler Valves can “stick” open while running from lack of water pressure, or is not getting enough electrical current to shut it off from the sprinkler controller, or even a small piece of debris is stuck in the sprinkler valve and won’t allow the sprinkler valve to close.


  1. […] and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it. The main downfall of a French Drain is, […]

  2. […] and Drains — Servicing all of central Oklahoma including Norman, Oklahoma City, Edmond, Mustang, Yukon, Moore, Blanchard, and […]

  3. […] customize your drainage system by utilizing a variety of drainage components such as French Drains, Surface Drains, Channel Drains, Basement Drains, Basin Drains, Trench Drains, and Sump Pumps to eliminate your […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: