Sprinkler System Contractor in Oklahoma City — CMG Sprinklers and Drains started 2014 with a Sprinkler System installation in South Oklahoma City. The home owner had well water for the Sprinkler System. The Well-Pump was a 1 and a half horse Well-Pump. This size Pump is very good for Sprinkler Systems. It is not too big and not too small. CMG can install Sprinkler Systems with Pumps as small as 3/4 horse. We also install Sprinkler Systems connected to any standard residential water meter up to two inch.
When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve. The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System. It can’t flow from the Sprinkler System to the well. This ensures that the Well Water will stay safe and pure.
Next, we installed a Master Valve. A Master Valve is always a “Must” for any Sprinkler System. A Master Valve allows a Sprinkler System to: 1. Drain Automatically Under Ground. 2. Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING. 3. Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System. If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop. If it was installed by CMG, then you call us. A Master Valve ensures that you will not have water running down the hill while you are waiting for service. Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM. EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY. ( WASHER, DISHWASHER SINK, etc.)
CMG also installs Drainage Systems, and provides expert Sprinkler Repair. If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.