Winter is a time when a lot can go wrong with a Sprinkler System. Sprinkler Pipes can freeze and break. Sprinkler heads can crack or bust. Above Ground Back-Flow Valves can crack or leak during some some of the warmest winters. CMG can fix all the above Sprinkler System Problems and much more. If you are having trouble with your Sprinkler Controller, or if you have a Sprinkler Head shooting out in the street, give CMG a call.
If you just have a question concerning your existing sprinkler system or are considering a new one, we are happy to share time and information with you!
Sprinkler Controllers in Yukon
ALONG THE WAY WE HAVE ALSO:
Replaced Broken Sprinkler Heads in Blanchard
Adjusted Sprinkler Heads spraying in the wrong place in Oklahoma City
Of course we have made thousands of different Sprinkler Repairs in different Cities locally.
Lawn Irrigation Systems installed by CMG are fully automatic. Sprinkler System Controller in the garage or outside on an exterior wall. The Sprinkler Controller need only be installed be plugged into a 110 electrical outlet.
Our Sprinkler Systems are Self-Draining. The Sprinkler Pipes Drain underground when the Irrigation System is turned off. Nothing needs to be done to prepare your Irrigation System for winter except turn it off. There is no water left in the Sprinkler Pipes to Freeze.
Sprinkler System Installation in Oklahoma can be complicated. There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come. Attention to detail makes all the difference when installing a Sprinkler System. Many times, So-Called, ” Fly By Night Sprinkler Companies,” cut lots of corners to save money. Low price should not be the determining factor for having a Sprinkler System installed. A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.
Two things you should require on any Sprinkler System:
1. Make shure PRIMER is used along with PVC Glue when the Sprinkler Pipe is put together. Primer helps the glue to bond to the PVC pipe. This ensures that all the pressurized pipe connections won’t leak over time. I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.
2. Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.” This ensures that no leaks will occur over time at this connection. The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on. A connection with Glue and Primer will not hold up to the stress over time. This is why a Compression T must be used.
The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.
For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.
My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993. I take great pride in my work. The Letters “CMG” stand for the first letter of the first name of each of my children. ( Chance, Melissa, Garrett ) = CMG
I have amassed a great deal of experience designing and installing Sprinkler Systems, Repairing Sprinkler Systems, and designing and installing Drainage Systems. In the past 19 years, I have made mistakes, but I have learned from them. As a result I get calls, from time to time, from other Sprinkler and Drainage companies that have run into a problem that they can’t handle. I am always glad to help.
I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or French Drain Installation. I prefer that the customer pay me when the job. In a few cases on very large jobs I request a draw or outlay for parts. The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw. The parts stay on the premises until they are installed.