Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Home » Drainage Problems

Category Archives: Drainage Problems

French Drain, Do It Your Self, DIY, French Drain Information, Surface Drain Installation

When Determining what type of Drain you need for your Drainage System.  In our last blog, we talked about Surface Water and Sub-Surface water and why you need to understand them before designing your Drainage System.  If you need to review, click below.  If you have a question or comment please leave it at the bottom of the page. I will respond as quickly as I can.

Previous Blog

Next Blog

Before we get into Water Movement, we need to discuss Surface Drains.

Surface Drains come in many shapes and sizes.  The two most common are Basin Drains and Channel Drains.

A Basin Drain has a Square Grate and it sits on top of a catch basin.  It will have a single pipe connected to it or it will have a drain pipe running into it and a pipe running out of it.  We used this picture in a previous blog, but I want to show it to you again.

Surface Drain Connection

Surface Drain connected to a Transition Pipe

Below is a Basin before the pipe is connected to both sides.  The pipe is cut and connected to one side.   Another piece of Drain Pipe is connected to the other side.  The Drain pipe does not run straight through the basin.  Water must have a way to enter the Drain Pipe.  The Surface Drain in the picture is the most common size used in residential applications.  The Drain Pipe connecting to it is 4 inch ADS Solid Drain Pipe.

For a Surface Drain to work well it must be placed in a low lying area of standing water.  It is not intended to intercept moving water or to drain away Sub-Surface water.

 

In review, detecting Surface Water is straight forward.  You can observe how it flows into the Problem Drainage Area.

Sub-Surface water is not so easy.  You can’t see it move into the problem area.  So What do you do?

First take a look at your soil.  What type of soil do you have?

Soil with a lot of clay will have less Sub-Surface Water, Maybe none at all.  If you do have some it will move into the area slowly.  If you have sandy soil the underground water will move there in a hurry.  Most people will have something in between.

To be sure, a few simple tests can help.

Next check the problem drainage area when there is no water standing in it.  Is it soft and mushy when the surrounding area is more firm?  This is an indication that Sub-Surface Water is still flowing into the area.  Another way to collect information is to dig a small hole about a foot deep in the area. Check it every day for several days.  If water is standing in the hole, you have a Sub-Surface Water issue.  How fast it flows into the hole is also important.

OK, you have Sub-Surface water along with Surface Water in your problem drainage area.  Your Choice for the correct “Intake” for your Drainage System should be a French Drain.

OK, You have no Sub-Surface water. You only have Surface Water flowing into the problem area.  You need a French Drain If you are trying to intercept the water as it comes into the area.  Many times water will run around the surface drain and still flood the area.  Also the Surface Drain is much more easily overwhelmed and water will run past it that way too.  Again, this is very important,  If you are trying to intercept water before it gets to where its going, don’t use a Surface Drain.

A Surface Drain should be used in a Medium to Low Volume Water situation.  The water needs to be stationary or moving very slowly.  It should be placed in an area that is the lowest point in the Problem Drainage area.  They also work well in smaller confined areas such as pool decks, along sidewalks, or in flower beds.

More than one Surface Drain can be connected to one drain pipe in a “Daisy Chain” of Drains if you have several low spots in a larger area.

In many cases a small french drain can be installed in almost every place that a Surface Drain might be installed.  People opt for a Surface Drain over a French Drain because they like the way the Surface Drain looks more than the way the French Drain looks.  For some People, Looks are more important than functionality.

Channel drain in concrete

Channel drain in concrete

Setting a Surface Drain in Concrete such as a driveway or a Sidewalk is a good application for a Surface Drain.  Many times it is better to install a French Drain in your yard over a Surface Drain.  What ever makes you happy!

French Drains can be made to look very decorative.

decorative french drain

French Drains can be decorated with many types of stone

In conclusions,

French Drains are used for :  1.  Higher water volume situations  2.  Intercepting moving Surface Water  3.  Solving Sub-Surface water problems

Surface Drains are used for: 1.  Smaller water volume situations  2.  Standing Surface Water that has reached its destination   3.  Smaller and more confined areas  4.  Set in concrete such as sidewalks or Driveways

 

Next Blog                 Previous Blog

Oklahoma Drainage and Sprinkler Repair –  Email us at

frenchdrain.sprinklerrepair@gmail.com  or call or text to 405 203 9419

French Drain InstallationDrainage System Repair, Sprinkler Repair, Emergency Sprinkler Repair,

Oklahoma City French Drain Installation, Yukon, Mustang, El Reno, Lawton

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

 

If you have water standing in your flowerbed we can install a French Drain For you.  If water is standing on your driveway or sidewalk a Surface Drain or Channel Drain set in concrete might be what you need.  If water is standing in your basement a Sump Pump installation is a good idea.

Drain Pipe for French Drain running under sidewalk

French Drain Pipe running to exit

Oklahoma Drainage and Sprinkler Repair –  Installing French Drains and providing Expert Sprinkler Repair since 1993.

FRENCH DRAIN AS PART OF A DRAINAGE SYSTEM

 

 

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

Oklahoma Drainage and Sprinkler Repair Installs all types of Drainage Systems.

Today we installed a 6 Inch French Drain at an apartment complex near Lake Heffner.  The French Drain started in the back yard of one unit.  The Drain Pipe went under the fence and into the adjoining unit’s back yard.  The French Drain then looped around their patio and out under their fence to the west.  To get the 6 inch Drain Pipe to the correct Exit Point, we had to cut out 30 feet of sidewalk and run the French Drain Pipe under the sidewalk.  Next, we replaced the sidewalk with new concrete.  Finally, we dug a drainage ditch across the front yard to the parking lot.  We covered the Drain Pipe with sod that we carefully removed when digging the trench.  At the edge of the parking lot a 6 inch Pop-Up Emitter was installed to release the Storm water.  Seven Gutters were connected directly into the Drainage System along the way.

This particular Drainage System was made up of 55 Feet of 6 inch French Drain, 78 Feet of Solid ADS Solid Drain Pipe, Seven Gutter Connections, and one 6 inch Pop-Up Emitter.

Surface Drain in Low Area in the Corner

Surface Drain in Low Area in the Corner

 

 

Oklahoma City French Drain Installation, Lawton, Edmond, Norman, Moore, Chickasha, Duncan

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

Drain Pipe for French Drain running under sidewalk

Drain Pipe for French Drain running under sidewalk

We Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   Our customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.

Oklahoma Drainage and Sprinkler Repair installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

Oklahoma Drainage and Sprinkler Repair  installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”
The Gentleman gave us a call to set up an appointment.  We arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

 

Installing a Curb Outlet For a French Drain in Edmond

Installing a Curb Outlet For a French Drain in Edmond

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

Edmond Oklahoma has been the location for many French Drain Installations for us in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water


 The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

 Next a French Drain Liner  needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  Oklahoma Drainage  then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Running Drain Pipe to the Curb From French Drain in Back Yard

Running Drain Pipe to the Curb From French Drain in Back Yard

 

 

 

Oklahoma City French Drain Installation, French Drain Repair, Drainage System Installation

French Drain Installation, Drainage Systems, Surface Drain, Sump pumps, – Oklahoma Drainage and Sprinkler Repair

Oklahoma Drainage and Sprinkler Repair,  Now Servicing  Duncan, Lawton, Chickasha and Altus

We have serviced all of Central Oklahoma Since 1993.  Now Oklahoma Drainage and Sprinkler Repair is expanding its operations to include Western Oklahoma as well.

Hard rain and flooding seem to be more common all the time.  When I started this business in 1993, having over an inch of rainfall in an hour was pretty extreme.  Now having over 4 inch an hour rainfall is not unheard of and is becoming more common.

Protecting our homes and businesses from unwanted water should be a goal for all of us.

Oklahoma Drainage and Sprinkler Repair has seen and dealt with virtually every possible Drainage and Standing water problem that can occur in or around your home.  With over 2000 Drainage Systems installed since 1993, we have amassed a great deal of experience.  This is help full in seeing underlying problems and secondary issues that may be hard to see at first for the ” Untrained Eye.”  This allows us to get things right the first time.  In this business EXPERIENCE TRULY COUNTS!

Hiring your brother in law to put in your Drainage System or French Drain is as bad as hiring a Lawn mowing company that does landscaping and drains too?  Water can cause a huge amount of damage.  How important is your money and your home?

Blane Callen, 405 203 9419

 

Is this your yard?

French Drain Installation has been an area of focus for Oklahoma Drainage and Sprinkler Repair  for the past 26 years.  During that time we have installed over 2000 French Drains in Central and Western Oklahoma A French Drain is one of several types of Drains that can make – up a Drainage System.   French Drains are intended to move large amounts of water away from a Problem Drainage Area.  Water may be standing in that area, flowing across the area on the surface, or flowing across the area below ground or “Sub Surface.”  A French Drain can remove Standing Water, Water Flow at ground level, or water flow below ground level. (Surface Drains can’t do this!)

A French Drain many is  used to move water away from or protect foundations.  A French Drain will move both Surface Water and Sub Surface water away from a buildings foundation to an Exit Point where the water can be released without doing damage.

 

IF YOU NEED WATER DRAINED AWAY FROM YOUR HOME OR BUSINESS CALL OKLAHOMA DRAINAGE AND SPRINKLER REPAIR – 405-203 9419

We install all types of Drainage Systems and French Drains.

French Drain Installation is a primary focus for us.

A French Drain Can Handle Standing Water

Since 1993 we have gained a lot of experience addressing drainage problems Drainage problems can be complicated.  The solution is not always clear to the untrained eye. We have repaired or overhauled many french drains and drainage systems that were installed by, “weekend warriors, a brother-in-law, or a landscaping company that also installs drains.”  They all can install Drainage Systems, Just not very well.

Oklahoma Drainage and Sprinkler Repair has over 26 years of experience Diagnosing Drainage Problems.  This ensures that a Drainage System that we install won’t have Drain Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  The above examples are just three of many “Pit – Falls” that our experienced Drainage System Experts can easily avoid.

Surface Drain installed in Oklahoma City

Surface Drain installed in Oklahoma City

 

Our Drainage Systems utilize:

French Drains– 3 inch, 4 inch, and 6 inch

Surface Drains, 4 inch, 6 inch, and 12 inch

Channel Drains, 2 inch, and 4 inch

Sump Pumps 3/4 horse to two horse

Servicing Central Oklahoma including: Oklahoma City, Norman, Edmond, Yukon, Mustang, Newcastle, Midwest City, Del City, Moore, Blanchard, Choctaw, and all surrounding areas.

Connecting Gutter into French Drain

Connecting Gutter into French Drain

 

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

 

 

 

French Drain Information, Installation, Lawton, Oklahoma City, Norman, Duncan, Chickasha

Oklahoma Drainage and Sprinkler Repair 405 203 9419

We Install Drainage Systems to fit various needs for home owners an businesses.  A Drainage System, can utilize French Drains, Surface Drains, Channel Drains or Sump Pumps as the intake part to the Drainage System.  The Drain or Sump Pump brings water into the Drain Pipe.  The Drain pipe takes the water to the ” Exit.”  Which is Either a “Curb Outlet” or a “ Pop Up Emitter.”

The Three parts of A Drainage System are:   THE  INTAKE ( French Drain or Surface Drain ) etc.  The TRANSITION ( The Drain Pipe ) which can be many sizes or type. The EXIT ( A Curb Outlet or Pop Up Emitter )

Curb Outlet as an Exit Point for a French Drain in Edmond

The Drainage part of our company name means that we solve water problems for people in Oklahoma.  Heavy rain is becoming more common.  Back in 1993 when I first started, a hard rain was considered to be about an Inch per/hour.  It was fairly rare but not too uncommon.  Today things are different.  A weather report of rain fall at or above 4 inches per/hour was not uncommon in 2019.  Excess water causes all types of damage to property both residential and commercial.

Our Drainage Systems drain water away from places you don’t want it to be.  You might have water standing along the foundation of your house, or inside your basement.  You might have water on your driveway or flowerbed too.

Designing a French Drain or a Drainage System

When I talk to a potential customer while doing a Drainage System estimate, I take a lot of things into consideration.  First I have the Customer show me where water is standing or where it is going that it shouldn’t.  This is part of defining the specific problem area.  Sometimes the Water Problem Area is larger and more involved than the customer realizes.  Once the Water Problem Area is clearly defined,  the next step is to determine how the water is getting to the problem area.  Many times there is more than one Water Source to the Water Problem area.  A big mistake in Drainage System Design is to stop once the most obvious  Water Source is found.  A Drainage System Designer must be a detective to some degree.  For Example:  Water running down the hill and onto the back patio might be the most obvious water source.  Sub-surface water or a neighbor’s new gutter downspout could also be contributing.  Most of the time water gets into the problem area from more than one source.

This is a good place for a French Drain

This is a good place for a French Drain

Next you must decide where to take the water.  This is determining an Exit Point for the Drainage System.  If possible you want your exit point to be down hill from the problem area.  If it is up hill in all directions from the problem area, then the only solution is a Sump Pump.

Once an exit Point is determined, you must ask yourself if there is any way to install two exit points.  Usually this can only work when an exit point can work on both ends of a Drainage System.  The benefit of two Exit Points in a Drainage System is it greatly increases the water capacity for the Drainage System.  It can move much more water faster during a heavy rain than a system with just one Exit Point.  Most Drainage Systems can only utilize one Exit Point.  In 21 years of Drainage System Installation,  I would say 10% of our Drainage Systems have two Exit Points.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

Next we have to decide what type of drain to install in the problem area.  If it is a small area with one water source, Usually a Surface Drain is best.  If the water problem area is large with one or several water sources, a French Drain is usually installed.

If you have several problem drainage areas you must use larger Drain Pipe if you want to connect them together  to one exit point.  Large French Drains should have their own exit point without attaching other Surface Drains or Gutters to them.  It is very common to connect too many drains or gutters into a Drainage System.  A hard rain can overwhelm the Drainage Systems Water Flow Capacity.  When that happens, water backs up and the problem area floods.

I just shake my head when I see 3 French Drains and 5 gutters connected into one exit drain pipe. I see this type of design all the time.  Why spend money for a Drainage System that won’t work?  Lots of Cheap Builders and Fly-By-Night Drainage Companies cut corners on Drainage Systems and French Drains on new home construction.

For a French Drain or a Surface Drain or any type of Drainage System,  If in doubt, use a larger Drain Pipe.  Four Inch Drain Pipe is the most common. Six inch Drain Pipe is always better.   If you are going to connect a French Drain and Surface Drain together, use 6 inch Drain Pipe.

French Drain Installation, Drainage Systems, Oklahoma City, Norman, Duncan, Lawton

Oklahoma Drainage and Sprinkler Repair Drainage System Installation, French Drain Installation, Lawn Sprinkler Repair, Since 1993.

Servicing: Oklahoma City, Norman, Edmond, Lawton, Duncan, and all of Central and Western Oklahoma

We can help with Standing Water in or around your home or business.

A good place for a French Drain

 

Just what is a “French Drain?” Many times people incorrectly

French Drain can protect your foundation!

use the phrase, “French Drain,” when they mean “Surface Drain” or “Channel Drain.”

A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench. The French Drain Trench runs through a Problem Drainage Area that needs to be drained.   The French Drain Pipe is perforated (Full of Small Holes) and has Neo-Prene Soc around the pipe.  This soc helps prevent debris from clogging the French Drain Pipe.

The dirt that was taken out to make the trench is hauled away. It is replaced by some type of small stone or gravel depending on what is desired or available. I prefer crushed 1 inch lime stone. It is the most economical option in my area. Pea Gravel or some other type of small stone can work just as well. The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level). In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed. This helps maintain the integrity of the trench over time. It also increases the cost of the French Drain and the amount of time to install it. I install a trench liner in a French Drain about 20% of the time. Most of the time a liner in not needed.

French Drain March 2011

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations. It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.

French Drain with Colored Gravel

The main downfall of a French Drain is that they, for the most part aren’t very pretty. They don’t look very nice in a yard once they are completed.

Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone. Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel. This is Ok. It won’t have a measurable effect on the performance of the drain.

DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT. THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT. DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.

DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.

French Drain Installation, French Drain Repair, Drainage System Installation, Drain Repair

French Drain Installation In Downtown Oklahoma City

French Drain connected to gutter

A little bit North of Downtown Oklahoma City,  Oklahoma Drainage and Sprinkler Repair installed a 6 inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6 inch French Drain between the two.

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Curb Outlet for French Drain

The French Drain had a Double Exit Point.  This means that once water entered the French Drain Pipe, it could run South to the street or it could run North to the alley.  To exit points greatly increases the water capacity for any French Drain.

Along the course of the French Drain, we connected two large gutters directly into the Drain Pipe.

Once in place, the French Drain eliminated all the water that was leaking into the two buildings.

Drainage Problem Solved!

French Drain Installation is a primary focus for Oklahoma Drainage and Sprinkler Repair

 

We install a variety of other types of Drains.  Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, and Sump Pumps.  In the past 21 years, we have installed French Drains to keep water away from home and business foundations, Surface Drains to keep water away from sidewalks and driveways,  Trench Drains, and French Drains to keep standing water out of flowerbeds and yards, and Sump Pumps to remove water from basements and outdoor low lying areas.

French Drain with stepping stones

French Drain with stepping stones

 

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

 

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give us a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, We specializes in just that!

 

Hard rain in Oklahoma is common.  Many homes and businesses have drainage problems. Standing water from storm water runoff can cause damage to grass, trees and shrubs, not to mention foundations, sidewalks and driveways. Oklahoma Drainage and Sprinkler Repair can design and install a drainage system that may be complex using several types of drains, or basic using just a French Drain or a Surface Drain.  It depends on the customer’s needs.

We Utilize:  French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, Basement Drains, and Sump Pumps

We service Central Oklahoma, including: Oklahoma City, Norman, Moore, Midwest City, Del City, Edmond, Mustang, Yukon, Purcell, Blanchard, Newcastle, Including all of Central and Western Oklahoma.

 

 

French Drain installed under a Channel Drain, Servicing Oklahoma City, Norman, Edmond, Mustang

Wow, Some Drainage Problems are tougher than others.  Had a customer in Chickasha with an unusual Drainage Problem.  She had a new Driveway installed.  The Cement work was nice enough but they left out one major consideration when installing the new Driveway.  Even after a small rain the water would run right down the driveway, under the Garage Door and directly into the Garage.  This was a bad problem that was about to get worse.  The first big rain came and everything was magnified.  The Rushing water took out the garage door and the back wall of the garage.  Yikes!!

Hmm,?  What to do?  The company that installed the Driveway was nowhere to be found.  No surprise.

The water volume was huge and the customer had no means to redo the driveway which was substantial.

The solution took a little “Out Of The Box Thinking”.

We Installed an 8 inch metal channel drain grate across the driveway.  But with no channel drain underneath.  A large channel drain could not handle the water volume that we were dealing with.  Instead of installing a channel drain underneath the grate, we cut completely through the driveway concrete and installed two 6 inch French Drains stacked on top of each other underneath the Channel Drain Grate.

This took place in July of 2017.  Since then not a drop of water has reached the garage.

We put two French Drains under a larger version of a drain that looks like the above picture.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

Lawton Oklahoma French Drain, Servicing Oklahoma City, Norman, Edmond, Yukon

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

French Drain Installation In Downtown Oklahoma City

French Drain

A little bit North of Downtown Oklahoma City,  Oklahoma Drainage and Sprinkler Repair installed a 6 inch French Drain between two businesses which were less than three feet apart.  The French Drain went between a Law Firm and a Tire shop.  Water was leaking through the walls of both businesses.  Gutters between the two establishments were dumping a huge amount of water.  We installed a 6 inch French Drain between the two.

French Drain Running Through Low Areas

French Drain with stepping stones

WHAT SIZE DRAIN PIPE FOR FRENCH DRAINS?

French Drains can be decorated with many types of stone

French Drains can be decorated with many types of stone

French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

French Drain connected to gutter

It took a long time to get the dirt out of the trench for the French Drain.  It was a very tight fit.  We had to use a little red wagon to haul out the dirt for the French Drain and haul back in the crushed limestone for the French Drain.  It looked a little silly, but it was the only thing we could find that was narrow enough to fit between the buildings.  A French Drain that normally would take 1 day to install took three.

Curb Outlet for French Drain

The French Drain had a Double Exit Point.  This means that once water entered the French Drain Pipe, it could run South to the street or it could run North to the alley.  To exit points greatly increases the water capacity for any French Drain.

Along the course of the French Drain, we connected two large gutters directly into the Drain Pipe.

Once in place, the French Drain eliminated all the water that was leaking into the two buildings.

Drainage Problem Solved!

French Drain with Gutter Down Spouts connected, Servicing Lawton, Oklahoma City, Edmond, Yukon

Do you have standing water in a large area in your yard?  Typically this calls for a French Drain.  A French Drain is a great way to control standing water in a large grassy area.  It can also protect areas from flooding to a certain degree.  As long as the French Drains capacity to move water is not exceeded.  If the French Drains capacity is exceeded then water will stand in the drainage area until the rain stops and the drain has time to catch up.  A good way to prevent this is to install a bigger French Drain with a larger pipe.  The difference between a 3 inch French Drain and a 6 inch French Drain is huge.

Another way to beef up a French Drain is to connect gutter down spouts in front of the French Drain.  The water coming off the roof causes suction in the French Drain Behind it.  This greatly increases the French Drains ability to move water without increasing the size of the French Drain Pipe.

Gutter Downspout Connected to 6 Inch French Drain