Central Oklahoma French Drains- CMGdrainagesysytems@yahoo.com 405-226-0629

Home » Drainage Systems (Page 2)

Category Archives: Drainage Systems

Advertisements

Sprinkler Repair Information, French Drain Installation

Sprinkler Repair —  Sprinkler InstallationAgnie’s List Award winner

Sprinkler Repair for all types and brands of Residential Sprinkler Systems

Lawn Sprinkler Repair is one of our areas of expertise.  We can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking  Sprinkler Pipes

4.  Shorted or disconnected valve wires

5.  Sprinkler Zones or Sprinkler Stations that won’t work

6.  Broken Sprinkler Heads

 

CMG Sprinklers and Drains can help if you need to re-design your sprinkler systemIf for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

CMG Sprinklers and Drains started 2015 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not too small.  CMG can install Sprinkler Systems with Pumps as small as 3/4 horse.   We also install Sprinkler Systems connected to any standard residential water meter up to two inch.

Sprinkler Valve installation in Edmond

Sprinkler Valve installation in Edmond 

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Back-Flow Valve installation in Norman

Back-Flow Valve installation in Norman 

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.  If it was installed by CMG, then you call us.  A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

Surface Drain installed in Oklahoma City

Surface Drain installed in Oklahoma City 

CMG also installs Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.

405-226-0629                        cmgsprinklers@hotmail.com   or cmgsprinklers@gmail.com

Advertisements

Where to put a French Drain?

A French Drain is a long perforated pipe in the bottom of a trench.  The trench runs through the problem drainage area.  The trench is filled with gravel or crushed lime stone.  The French Drain takes in water any place that water runs into the trench.

A French Drain will move large amounts of water from the Drainage Problem Area to the Exit point.

A French Drain will Drain away water that gets to the Drainage Problem Area in 3 ways.

1.  Water gets to the problem area by falling from the sky.

2.  Water gets to the problem area by flowing down hill over the ground.

3.  Water gets to the problem area by flowing underground. (Sub-Surface water flow)

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

Number 3,  Sub-Surface water flow is the big consideration.  When doing a Drainage Diagnostic, this is the area that is many times missed or not considered by less experienced companies.  CMG relies on 21 years of experience.  Many Times it is cheaper and more effective to install a French Drain over a Surface Drain.  A Surface Drain can’t move as much water as a French Drain, and a Surface Drain can’t Drain away Sub-Surface waterSurface Drains should be installed in areas where the Drainage Problem area is smaller and is not affected by sub-surface water.

The draw back to a French Drain, is that it is not a pretty as a Surface Drain.

French Drains do a great job running along foundations and driveways.  A French Drain will keep water away from cement and prevent damage to concrete if water should freeze up against it.  A French Drain can keep your foundation Dry.

CMG Services Oklahoma City, Moore, Norman, Edmond, Yukon, Mustang, Midwest City, and all surrounding Central Oklahoma.

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

For Small business and Residential French Drains, Four inch ADS Perf/Soc French Drain pipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3 inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutter down spouts connected directly into the French Drain, For Example)  Three Inch French Drain Pipe should be avoided if possible.

Connecting Gutter into French Drain System in Moore

Connecting Gutter into French Drain System in Moore

Six inch  ADS Perf/Soc French Drain Pipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

The Drawbacks to 6 inch French Drain installation are:  1.  The Materials Cost is higher for six-inch French Drain Compared to Four Inch Pipe.
                                                                                                                    2.  Many times 6 Inch French Drain Pipe is too large for many applications, Such as going under a fence or sidewalk.  
                                                                                                                   3.  The trench for a 6 inch French Drain must be much larger than a 4 Inch
                                                                                                                   4.  The amount of gravel or limestone or River Rock used to Cover the 6 inch French Drain is Much larger
 
All things being considered, the performance and longevity of a 6 inch French Drain is well worth it if you are trying to protect something of value to you!  If the higher cost and the additional labor and materials are not a problem and 6 inch French Drain pipe is not too big for what you want to do then a 6 inch French Drain would be the best.  
 
 

Good Information about French Drains and Drainage Systems

French Drains, Surface Drains, and Channel Drains are the three main ingredients of residential and business Drainage Systems.  Simply put, French Drains are used in large areas, Surface Drains are used in smaller areas and Channel Drains are used in and across Cement.

Some Simple rules about French Drains and Surface Drains.  A French Drain should be installed when there is a large volume of water to be drained over a large area.  Surface Drains are needed when the water volume is smaller and the Drainage Area is small and focused.  French Drains move away Surface Water and Sub-Surface water (water that flows under ground).  Surface Drains move only surface water.

 

Installing a Curb Fitting for a French Drain in Back yard

Installing a Curb Fitting for a French Drain in Back yard

 

 

French Drain Design must take into account many variables.  One consideration for a French Drain that many times is missed, is the type of soil.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.  The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.  A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

 

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Curb Outlet as an Exit Point for a French Drain in Edmond

Curb Outlet as an Exit Point for a French Drain in Edmond

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

CMG Installs all types of Drainage Systems  in Oklahoma.

Today we installed a 6 Inch French Drain at an apartment complex near Lake Heffner.  The French Drain started in the back yard of one unit.  The Drain Pipe went under the fence and into the adjoining unit’s back yard.  The French Drain then looped around their patio and out under their fence to the west.  To get the 6 inch Drain Pipe to the correct Exit Point, we had to cut out 30 feet of sidewalk and run the French Drain Pipe under the sidewalk.  Next, we replaced the sidewalk with new concrete.  Finally, we dug a drainage ditch across the front yard to the parking lot.  We covered the Drain Pipe with sod that we carefully removed when digging the trench.  At the edge of the parking lot a 6 inch Pop-Up Emitter was installed to release the Storm water.  Seven Gutters were connected directly into the Drainage System along the way.

Installing Gravel on top of a 6 inch French Drain

Installing Gravel on top of a 6 inch French Drain

This particular Drainage System was made up of 55 Feet of 6 inch French Drain, 78 Feet of Solid ADS Solid Drain Pipe, Seven Gutter Connections, and one 6 inch Pop-Up Emitter.

French Drain Solutions, Surface Drains, Drainage Systems

Drain Pipe for French Drain running under sidewalk

Drain Pipe for French Drain running under sidewalk

CMG Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   The CMG customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.  CMG installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”  He also checked us out on Angie’s List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.
The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

 

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

 

Problem solved!

Edmond Oklahoma has been the location for many French Drain Installations for CMG in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water


 The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

 Next a French Drain Liner  needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  CMG then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Running Drain Pipe to the Curb From French Drain in Back Yard

Running Drain Pipe to the Curb From French Drain in Back Yard

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”  He also checked us out on Angie’s List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

Problem solved!

French Drain, Drainage Solutions, Leaking Pipe Repair

 

OKLAHOMA CITY FRENCH DRAIN

Angie’s List Customer Service Award Winner        Activerain Member

French Drain Installation is a primary focus for CMG.  We have 21 years of experience installing all types of Drainage Systems.  French Drains and Surface Drains are the most common.  French Drains when installed correctly, move water faster and in greater volume than Surface Drains.  French Drain installation requires experience and attention to detail for best performance.  CMG provides both.

French Drain With Colored Gravel

French Drain With Colored Gravel

 

 

Oklahoma City is one of the communities in  Oklahoma that CMG services.  We have installed almost a thousand French Drains in the Oklahoma City community in the past 21 years.  Oklahoma City  has many hills and valleys.  Many Neighborhoods are built on hillsides.  This causes many Drainage Problems.  CMG has installed French Drains by themselves and as a part of Drainage Systems to protect Driveways, Sidewalks, Foundations all over Edmond.  French Drains may be installed in Flower Beds or grassy areas too.  French Drains when installed correctly can provide many years of property protection and Piece of Mind.

French Drain in Oklahoma City

French Drain in Oklahoma City

 

CMG has 21 years of experience installing French Drains, and Drainage Systems.  This ensures that a Drainage System that we install won’t have Drain Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  CMG relies on 21 years of experience to Diagnose a Drainage Problem.   Many Drainage Problems are not as simple as they seem.  Understanding why a French Drain should be installed over a Surface Drain in particular situations is just one of many variables that must be considered when Diagnosing a Drainage Problem.

Many times CMG is asked to look at Drainage Systems that aren’t working correctly.  Here are a few common problems that we find:

French Drain Pipe is too small for the Drainage Area.

French Drain is not connected to an Exit Point.

French Drain is installed where a Surface Drain is needed.

Surface Drain is installed where a French Drain is needed.

Too many gutters connected to French Drain.

French Drain covered with dirt.

Exit Point Covered with Dirt.

Water flow is bad for French Drain,  (trying to drain water up hill)

These are just a few of the Problems we are asked to solve when fixing a Drainage System that wasn’t designed correctly.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

If you have a question about French Drain Installation contact us.  We will respond ASAP!   Send question to Blane at cmgsprinklers@gmail.com

 

French Drain, Drainage System, Oklahoma City, Edmond, Norman, Yukon

FRENCH DRAIN, DRAINAGE SYSTEM, OKLAHOMA CITY, EDMOND, NORMAN, YUKON

 

French Drains can be installed by themselves, or as part of a Drainage System that uses other French Drains, Surface Drains, or other Drain combinations.  Typically a French Drain is used to protect a broad area that has a lot of standing water.  A French Drain might run along side a homes foundation, or beside a driveway, or on any Drainage Project where Sub-Surface water is the primary problem.  If water is running toward your home under ground ( through sandy soil), A French Drain is the only Solution  for draining away water flowing under ground.

After Diagnosing a Drainage Problem in Oklahoma City, We installed a 6 inch French Drain that went all the way around the pool in the back yard and then ran all the way to the street on both sides of the house. The French Drain made the shape of a horse shoe. The Drainage System had two Curb Outlets installed through the curb at the street. This gave the French Drain two different directions to allow the water to flow to the street.  Two Drain Outlets allowed the French Drain to move a huge amount of water during heavy rains.   A few weeks  later we got a call from our customer after a heavy rain.  She was very happy.  The French Drain did a great job protecting her pool.  All the Storm Water was diverted around the Swimming Pool.

French Drain installation is a big focus for CMG during our 21st year in business. A French Drain is one part of a Drainage System.  A French Drain can be connected to other types of Drains or Gutter Down-Spouts and then run through Drain Pipe to an Exit point where the water is released.

A Drainage Exit Point is the area where water goes to be released when it comes out of the Drainage System. The two most common exit points for a Drainage System are a Pop-Up Emitter or a Curb Fitting.
A Pop-Up Emitter is a Fitting on the end of a Drain Pipe that has a lid that pops up and releases water. When water drainage is complete, the lid shuts back.

Gutter Downspout Connected to 6 Inch French Drain
Gutter Downspout Connected to 6 Inch French Drain

CMG Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   The CMG customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.  CMG installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

If you live in Oklahoma City and need a French Drain installed in your yard, or along your driveway, or near your foundation, give CMG a call.  If you live in Edmond or Norman and need a Surface Drain installed in the concrete in your sidewalk or driveway, we can help.  If you live in Mustang or Yukon and would like to protect your trees or flower beds from standing water with a French Drain, CMG specializes in just that!

French Drain, Surface Drain, Photos and Information

FRENCH DRAIN, SURFACE DRAIN PHOTOS AND INFORMATION

 

 Standing water can cause many types of property damage ranging from foundation problems to cracked sidewalks and dead plants and shrubs.  If you have need of French Drain or Surface Drain, give CMG a call.  We provide free estimates for all of central Oklahoma.

French Drain With Colored Gravel in Oklahoma City

French Drain With Colored Gravel in Oklahoma City

 

Installing Cement around Curb Fitting for French Drain in Norman

Installing Cement around Curb Fitting for French Drain in Norman

Some Drainage Systems are complex and incorporate several types of drains.  Most Drainage Systems , however are basic and require just one type of DrainCMG installs a variety of drains to solve a variety of problems. French Drains, Surface Drains, and Channel Drains are most commonly used.  If you live in Edmond and need a Channel Drain installed across your driveway, or if you live in Norman and need a French Drain in your backyard, or if you live in Oklahoma City and need a Surface drain installed next to your sidewalk, give CMG a call.    405-226-0629

Channel Drain Installed by CMG In Yukon

Channel Drain Installed by CMG In Yukon

Channel Drains are one kind of Surface Drain that we install in concrete.

The most common Drain that we install is the French Drain.  This is because the French Drain is versatile.  It can handle Surface Water Problems or Underground Water Problems (sub-surface).  A huge mistake that many people make is assuming that water gets to a Problem Drainage Area by flowing over the surface only.  For example, if water is flowing down hill underground toward your home’s foundation, the only way to stop or intercept it is with a French Drain.  Water can flow laterally into a perforated French Drain Pipe.  It is then diverted away from the Problem Drainage Area to an Exit Point.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

Pop Up Emitters can release water from Surface Drains or French Drains.  They can release water on to sidewalks or driveways, or out in the middle of yards.

 

CMG Servicing: Oklahoma City, Moore, Edmond, Norman, Yukon, Mustang, and all of central Oklahoma.

 

 

French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

 

 

Pipe running to street form French Drain in  back yard.

Pipe running to street form French Drain in back yard.

When we run Drain Pipe across yards to an Exit Point, the sod usually can be put back into place and in a few days you can’t tell a French Drain was ever Installed.
A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the French Drain.  In some cases thick grass growing up through the French Drain will create a natural “Thatch” filter.  This makes the French Drain invisible.  The trick is to allow the grass to grow over the French Drain Gravel without covering it up with dirt.  Grasses such as Bermuda which grow well in the sun will put out runners and new roots and will grow up and through the French Drain.  This will not affect the performance of the French Drain.  The problem is that some times depending on the type of soil involved, it may take a long time to completely cover up the French Drain.  Sprinkling grass seed down in the gravel will speed up the process.
DON’T COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.   

Installing a Curb Outlet for a French Drain in Oklahoma City

Installing a Curb Outlet for a French Drain in Oklahoma City

If you install a French Drain in a sunny area, you can:
                                         A.  Leave the  French Drain as-is and allow grass to grow over it in time.
                                         B.  Add grass seed directly to the French Drain gravel with (Light Hand Watering) to speed the growth process
                                         C.  Leave the French Drain as-is but decorate it with stepping stones and landscaping rocks ( leaving large cracks between stones to allow water to get into the French Drain,
2
If you install a French Drain in a shady area you can:
                                        A.  Leave the French Drain as-is, it will work well and look as it did for many years.
                                        B.  Leave the French Drain as-is, but decorate it with stepping stones or landscaping rocks.  Many French Drains are hidden under rock walk ways.

IF YOU NEED WATER DRAINED AWAY FROM YOUR HOME OR BUSINESS CALL CMG.  405-226-0629 CMG Sprinklers and Drains installs all types of Drainage Systems and French Drains.

French Drain Installation is a primary focus for CMG Sprinklers and DrainsAngie’s List has awarded us their Customer Service Award for the State of Oklahoma for top quality French Drain Installation.  Along with the French Drain Customer Service Award, Angie’s List has given CMG their top A+ Rating and placed us at the top of their website for Oklahoma French Drain Installation.

Sometimes Surface Drains make more sense when the Drainage Problem area is fairly small with Surface Water Flowing into it.
  CMG also installs a variety of other types of Drains.  Our Drainage Systems may utilize: French Drains, Surface Drains, Channel Drains, Trench Drains, Basin Drains, and Sump Pumps.  In the past 21 years, we have installed French Drains to keep water away from home and business foundations, Surface Drains to keep water away from sidewalks and driveways,  Trench Drains, and French Drains to keep standing water out of flowerbeds and yards, and Sump Pumps to remove water from basements and outdoor low lying areas.

French Drain with stepping stones

French Drain with stepping stones