Central Oklahoma French Drains- CMGdrainagesysytems@yahoo.com 405-226-0629

Home » French Drains (Page 2)

Category Archives: French Drains

Advertisements

Where to put a French Drain?

A French Drain is a long perforated pipe in the bottom of a trench.  The trench runs through the problem drainage area.  The trench is filled with gravel or crushed lime stone.  The French Drain takes in water any place that water runs into the trench.

A French Drain will move large amounts of water from the Drainage Problem Area to the Exit point.

A French Drain will Drain away water that gets to the Drainage Problem Area in 3 ways.

1.  Water gets to the problem area by falling from the sky.

2.  Water gets to the problem area by flowing down hill over the ground.

3.  Water gets to the problem area by flowing underground. (Sub-Surface water flow)

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

Number 3,  Sub-Surface water flow is the big consideration.  When doing a Drainage Diagnostic, this is the area that is many times missed or not considered by less experienced companies.  CMG relies on 21 years of experience.  Many Times it is cheaper and more effective to install a French Drain over a Surface Drain.  A Surface Drain can’t move as much water as a French Drain, and a Surface Drain can’t Drain away Sub-Surface waterSurface Drains should be installed in areas where the Drainage Problem area is smaller and is not affected by sub-surface water.

The draw back to a French Drain, is that it is not a pretty as a Surface Drain.

French Drains do a great job running along foundations and driveways.  A French Drain will keep water away from cement and prevent damage to concrete if water should freeze up against it.  A French Drain can keep your foundation Dry.

CMG Services Oklahoma City, Moore, Norman, Edmond, Yukon, Mustang, Midwest City, and all surrounding Central Oklahoma.

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

For Small business and Residential French Drains, Four inch ADS Perf/Soc French Drain pipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3 inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutter down spouts connected directly into the French Drain, For Example)  Three Inch French Drain Pipe should be avoided if possible.

Connecting Gutter into French Drain System in Moore

Connecting Gutter into French Drain System in Moore

Six inch  ADS Perf/Soc French Drain Pipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

The Drawbacks to 6 inch French Drain installation are:  1.  The Materials Cost is higher for six-inch French Drain Compared to Four Inch Pipe.
                                                                                                                    2.  Many times 6 Inch French Drain Pipe is too large for many applications, Such as going under a fence or sidewalk.  
                                                                                                                   3.  The trench for a 6 inch French Drain must be much larger than a 4 Inch
                                                                                                                   4.  The amount of gravel or limestone or River Rock used to Cover the 6 inch French Drain is Much larger
 
All things being considered, the performance and longevity of a 6 inch French Drain is well worth it if you are trying to protect something of value to you!  If the higher cost and the additional labor and materials are not a problem and 6 inch French Drain pipe is not too big for what you want to do then a 6 inch French Drain would be the best.  
 
 
Advertisements

Good Information about French Drains and Drainage Systems

French Drains, Surface Drains, and Channel Drains are the three main ingredients of residential and business Drainage Systems.  Simply put, French Drains are used in large areas, Surface Drains are used in smaller areas and Channel Drains are used in and across Cement.

Some Simple rules about French Drains and Surface Drains.  A French Drain should be installed when there is a large volume of water to be drained over a large area.  Surface Drains are needed when the water volume is smaller and the Drainage Area is small and focused.  French Drains move away Surface Water and Sub-Surface water (water that flows under ground).  Surface Drains move only surface water.

 

Installing a Curb Fitting for a French Drain in Back yard

Installing a Curb Fitting for a French Drain in Back yard

 

 

French Drain Design must take into account many variables.  One consideration for a French Drain that many times is missed, is the type of soil.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.  The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.  A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

 

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Curb Outlet as an Exit Point for a French Drain in Edmond

Curb Outlet as an Exit Point for a French Drain in Edmond

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

Popup Emitter to release water from a French Drain in Yukon

Popup Emitter to release water from a French Drain in Yukon

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

CMG Installs all types of Drainage Systems  in Oklahoma.

Today we installed a 6 Inch French Drain at an apartment complex near Lake Heffner.  The French Drain started in the back yard of one unit.  The Drain Pipe went under the fence and into the adjoining unit’s back yard.  The French Drain then looped around their patio and out under their fence to the west.  To get the 6 inch Drain Pipe to the correct Exit Point, we had to cut out 30 feet of sidewalk and run the French Drain Pipe under the sidewalk.  Next, we replaced the sidewalk with new concrete.  Finally, we dug a drainage ditch across the front yard to the parking lot.  We covered the Drain Pipe with sod that we carefully removed when digging the trench.  At the edge of the parking lot a 6 inch Pop-Up Emitter was installed to release the Storm water.  Seven Gutters were connected directly into the Drainage System along the way.

Installing Gravel on top of a 6 inch French Drain

Installing Gravel on top of a 6 inch French Drain

This particular Drainage System was made up of 55 Feet of 6 inch French Drain, 78 Feet of Solid ADS Solid Drain Pipe, Seven Gutter Connections, and one 6 inch Pop-Up Emitter.

French Drain Solutions, Surface Drains, Drainage Systems

Drain Pipe for French Drain running under sidewalk

Drain Pipe for French Drain running under sidewalk

CMG Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   The CMG customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.  CMG installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”  He also checked us out on Angie’s List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.
The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

 

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

 

Problem solved!

Edmond Oklahoma has been the location for many French Drain Installations for CMG in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water


 The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

 Next a French Drain Liner  needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  CMG then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Running Drain Pipe to the Curb From French Drain in Back Yard

Running Drain Pipe to the Curb From French Drain in Back Yard

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”  He also checked us out on Angie’s List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

Problem solved!

French Drain, Drainage Solutions, Leaking Pipe Repair

 

OKLAHOMA CITY FRENCH DRAIN

Angie’s List Customer Service Award Winner        Activerain Member

French Drain Installation is a primary focus for CMG.  We have 21 years of experience installing all types of Drainage Systems.  French Drains and Surface Drains are the most common.  French Drains when installed correctly, move water faster and in greater volume than Surface Drains.  French Drain installation requires experience and attention to detail for best performance.  CMG provides both.

French Drain With Colored Gravel

French Drain With Colored Gravel

 

 

Oklahoma City is one of the communities in  Oklahoma that CMG services.  We have installed almost a thousand French Drains in the Oklahoma City community in the past 21 years.  Oklahoma City  has many hills and valleys.  Many Neighborhoods are built on hillsides.  This causes many Drainage Problems.  CMG has installed French Drains by themselves and as a part of Drainage Systems to protect Driveways, Sidewalks, Foundations all over Edmond.  French Drains may be installed in Flower Beds or grassy areas too.  French Drains when installed correctly can provide many years of property protection and Piece of Mind.

French Drain in Oklahoma City

French Drain in Oklahoma City

 

CMG has 21 years of experience installing French Drains, and Drainage Systems.  This ensures that a Drainage System that we install won’t have Drain Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  CMG relies on 21 years of experience to Diagnose a Drainage Problem.   Many Drainage Problems are not as simple as they seem.  Understanding why a French Drain should be installed over a Surface Drain in particular situations is just one of many variables that must be considered when Diagnosing a Drainage Problem.

Many times CMG is asked to look at Drainage Systems that aren’t working correctly.  Here are a few common problems that we find:

French Drain Pipe is too small for the Drainage Area.

French Drain is not connected to an Exit Point.

French Drain is installed where a Surface Drain is needed.

Surface Drain is installed where a French Drain is needed.

Too many gutters connected to French Drain.

French Drain covered with dirt.

Exit Point Covered with Dirt.

Water flow is bad for French Drain,  (trying to drain water up hill)

These are just a few of the Problems we are asked to solve when fixing a Drainage System that wasn’t designed correctly.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

If you have a question about French Drain Installation contact us.  We will respond ASAP!   Send question to Blane at cmgsprinklers@gmail.com

 

French Drain Information, Oklahoma City, Edmond, Norman, Yukon

FRENCH DRAIN INFORMATION, OKLAHOMA CITY, EDMOND, NORMAN, YUKON.

 

Angie’s List Customer Service Award Winner        Activerain Member

 

 

French Drains are designed to cover large areas and move lots of water.  During a hard rain water will seep down through the gravel and into the Perforated French Drain Pipe that is buried under the gravel.  The water fills into the pipe and moves down hill to the desired Exit Point.  French Drains like the one in the picture above that are in the sun most of the day will have grass that overgrows the limestone.  The gravel will disappear over time.  The French Drain will continue to work even after the grass has grown over it.  A “Thatch Filter ” is made up of the grass that covers the French Drain.  The French Drain then has two filters.  First is the Neo-Prene Soc that comes around the Perforated French Drain Pipe.  Later when the grass grows over it, the French Drain then has a second Thatch Filter.  This ensures that the French Drain Pipe won’t clog over time with dirt, sand, or debris.  This only works with grass that does well in the sun like Bermuda or Tift.

Shade Grasses won’t grow up and through French Drain gravel.

 

French Drain Pipe Installation in Edmond

French Drain Pipe Installation in Edmond

 

Installing a French Drain by itself or as part of a Drainage System is a very fulfilling aspect of my job as owner of CMG Sprinklers and Drains.  Many times Drainage Problems have caused damage to homes or businesses.  Understandably the owners are stressed an unhappy.  Over the years French Drain installation has solved a broad range of problems caused by “Standing Water.”  French Drains have removed water from home foundations and stopped further water damage.  French Drains have protected and enhanced driveways and sidewalks.  French Drain Installation has also removed Standing Water from flowerbeds and yards that weren’t level.  Once we even solved a water flow problem where a customer in Chickasha had water tear off their garage door and take out the back wall of the garage.  A Double 6 inch French Drain across the hillside above the driveway solved the problem.  Providing piece of mind and safety to property is satisfying.  French Drain Installation Provides this!

 

Curb Outlet to release water from French Drain in Norman

Curb Outlet to release water from French Drain in Norman

French Drains Solve Lots of Drainage Problems

FRENCH DRAINS SOLVE LOTS OF DRAINAGE PROBLEMS!

We just finished a 4 inch Drainage System in Yukon.  It was a complicated system to install.  It utilized 4 inch French Drain in the flower beds,  12 inch Surface Drains on the side of the house,  6 inch French Drain along the garage foundation with 2 Pop – Up Emitters in the back yard and 3 Curb Fittings in the front.    First we installed 4 inch French Drain in the flowerbeds on both sides of the front door.  We connected 4 inch solid Drain Pipe into the French Drain and ran them underside walk to the curb.  Next we cut the curb with a concrete saw and installed 3 curb outlets for 3 separate French Drains.

Next we installed 4 12 Inch Drain Basins with grates along both sides of the house continuing with Solid Drain Pipe to the Pop-Up Emitters on the back fence. Finally we completed the Drainage System by installing a long run of 6 inch French Drain down the side of the garage foundation.   Installing the French Drains in the flower beds was the most difficult and took the most time.  Each French Drain took over a ton of crushed limestone to fill the French Drain trench.  The Six inch French Drain took even more limestone.

French Drains can utilize  several types and sizes of French Drain Pipe.  An older type that is not commonly used any more is 4 inch PVC Pipe with large half inch holes drilled in the Pipe.  This doesn’t work very well,   Because the holes are too large and the number of holes in the French Drain Pipe are too few.  Also there is no filter or “Soc” around this particular French Drain Pipe.  If it is used in sandy or loose soil the holes will clog and the pipe will fill up with sand.  PVC French Drain Pipe should be avoided.

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

Installing a Drain Pipe For a French Drain that Releases water through a Pop-Up Emitter at the Street

ADS French Drain Pipe is much better, the holes are smaller and much more numerous.  It also comes inside a soc that acts as a filter and helps keep sand and debris out of the French Drain Pipe.  It works very well.

For Small business and Residential French Drains, Four inch ADS Perf/Soc French Drain pipe is adequate and the most common.  It is used for the majority of all French Drains installed.  French Drains can be installed using 3 inch ADS Perf/Soc but many times it is too small and can be overwhelmed by a heavy rain or from a bad design.  (Too many gutter down spouts connected directly into the French Drain, For Example)  Three Inch French Drain Pipe should be avoided if possible.

Connecting Gutter into French Drain System in Moore

Connecting Gutter into French Drain System in Moore

Six inch  ADS Perf/Soc French Drain Pipe is usually a good idea when possible.  It carries a much larger volume of water.  Six Inch French Drains are rarely overwhelmed.

The Drawbacks to 6 inch French Drain installation are:  1.  The Materials Cost is higher for six-inch French Drain Compared to Four Inch Pipe.
                                                                                                                    2.  Many times 6 Inch French Drain Pipe is too large for many applications, Such as going under a fence or sidewalk.  
                                                                                                                   3.  The trench for a 6 inch French Drain must be much larger than a 4 Inch
                                                                                                                   4.  The amount of gravel or limestone or River Rock used to Cover the 6 inch French Drain is Much larger
 
All things being considered, the performance and longevity of a 6 inch French Drain is well worth it if you are trying to protect something of value to you!  If the higher cost and the additional labor and materials are not a problem and 6 inch French Drain pipe is not too big for what you want to do then a 6 inch French Drain would be the best.  
 
CMG Services Oklahoma City, Moore, Norman, Edmond, Yukon, Mustang, Midwest City, and all of Central Oklahoma.

French Drain can keep water out of air conditioning ducts

A FRENCH DRAIN CAN KEEP WATER OUT OF AIR CONDITIONING DUCTS

Angie’s List Customer Service Award Winner        Activerain Member

 

French Drain Installation can prevent water from getting into your air conditioner floor ducts.

French Drain in Flower Bed in Edmond

French Drain in Flower Bed in Edmond

A common Drainage Problem for people in Central Oklahoma is ground water seeping into floor air conditioner  ducts.  This can cause very costly damage to a home or business.  Water-proofing Ducts, or even worse, trying to remove mold from duct work can cost big bucks.   Structural Engineers typically recommend  French Drain Installation  to keep water out of ducts.   French Drains catch and remove sub-surface water that is traveling underground toward a foundation. It is intercepted by the French Drain before it can seep under the building in question.   Because this water is not usually seen, it may not be taken into consideration when diagnosing drainage problems.  Surface Water traveling to a problem area is obvious as it flows on the surface in plain sight.

Gutter connected straight into 6 inch French Drain System in Oklahoma City

Gutter connected straight into 6 inch French Drain System in Oklahoma City

CMG has 21 years of experience Diagnosing Drainage Problems.  We always check for sub-surface water flow into any Problem Drainage Area.  Again, French Drains are intended to handle water moving both underground and above ground.

Installing Channel Drain Across Sidewalk in Norman

Installing Channel Drain Across Sidewalk in Norman

French Drains can also be used to remove water that is standing in a large area such as up against a foundation or along a fence.  French Drains don’t do so well in tight small areas.  These areas are best suited for a Surface Drain with a grate.  Many times we install French Drains along foundations after a home owner has spent large amounts of money on foundation repair.

Surface Drain Installation in Edmond

Surface Drain Installation in Edmond

Several Foundation Repair companies and Duct waterproofing companies recommend CMG for French Drain Installation.    Typically we install a French Drain by itself or as part of a Drainage System  after they have completed their repairs to the foundation or duct work.

Drainage Problems occur in all types of places.  Water can stand along fences or driveways, or in yards and flowerbeds.   Damage can be done to sidewalks and in yards.  Finding a good Drainage Solution usually involves a French Drain.

French Drain Running Through Low Areas in Yukon

French Drain Running Through Low Areas in Yukon

CMG provides quality service for central Oklahoma.  If you live in Norman and need a French Drain, or if you live in Oklahoma City and want a Channel Drain installed across your driveway, give us a call.  We have installed Drainage Systems and French Drains in:  Oklahoma City, Edmond, Moore, Midwest City, Norman, Yukon, Mustang, Del City, Blanchard, Newcastle and all surrounding areas.

Installing Curb Outlet for French Drain in Oklahoma City

Installing Curb Outlet for French Drain in Oklahoma City

Recently we installed a French Drain in Norman.  Our customer had water running down the hill from his neighbor’s Sprinkler System into the North wall of his house.  Over time the ground became saturated and water seeped under the wall and into his floor air conditioning vents.  We installed a 4 inch French Drain along the North wall of his house to provide a barrier to the continuous water flow.  In a few days the moss that was growing on the side of his house began to die from lack of water.  A Duct company came in and cleaned out is vents.  The French Drain removed the surface and sub surface water that was flowing into his home.   Problem solved.