Central Oklahoma French Drains- CMGdrainagesysytems@yahoo.com 405-226-0629

Home » sprinkler system

Category Archives: sprinkler system

Sprinkler Repair Information, Oklahoma City, Edmond, Norman, Yukon

Spring is here.  Now is a good time to plan for a new Lawn Sprinkler System. CMG has installed top quality Lawn Sprinkler Systems since 1993.  Our Sprinkler Systemsare automatic and self draining requiring little to no maintenance.  Sprinkler System Installation requires experience and attention to detail. CMGcan install any sprinkler brand available, but we prefer Rain Bird or Hunter.

Sprinkler Repair usually occurs in the Spring. CMGcan help with: Broken Sprinkler Heads, Leaking or stuck sprinkler valves, broken Sprinkler Pipes, Sprinkler Controller/Clock problems,  plus any other sprinkler system problem you might have.

 

Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 

Advertisements

Edmond Oklahoma Sprinkler Repair, Oklahoma City, Yukon, Mustang, More, Norman

For twenty one years, CMG has provided Sprinkler Repair for Central Oklahoma.

Lawn Irrigation Systems require maintenance from time to time.  All types of Sprinkler Repair become necessary.    Sprinkler heads break for several reasons.  Dogs chew up Sprinkler Heads.  Tree roots twist and break Sprinkler heads.  Cars run over and break Sprinkler Heads.  Weed Eaters cut the tops off Sprinkler Heads.  If you have a Sprinkler Head that is not performing perfectly, CMG can help.

Sprinkler Valves can have trouble too.  The Sprinkler Valve Wiring becomes disconnected or shorts out.  Tree Roots can stretch or break the Sprinkler WiresSprinkler Valves can start leaking over time. CMG can solve Sprinkler Valve problems of all types.

The Sprinkler Valves that you see above are a mess.  They were leaking and weren’t working correctly.  We replaced the above Sprinkler Valves with the ones you see below.

Sprinkler System Controllers can cause big headaches for home owners as well.  CMG can install a new sprinkler controller quickly and easily.

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

CMG recently repaired a Sprinkler System in Blanchard.  We replaced many Sprinkler Heads and fixed broken Sprinkler Pipes.  It took only a few hours to do the work. 

Quality Sprinkler Repair is all about experience.  For twenty years, CMG has:

Replaced Damaged Sprinkler Valves.

Replaced or Adjusted Broken  Sprinkler Heads

Replaced or Reprogrammed Sprinkler System Controllers

Explained Sprinkler Controller Features and Settings

Fixed Broken Sprinkler Pipes

Found and Repaired Broken Sprinkler Wire

Replaced or Adjusted Broken Back Flow Valves

Almost all Sprinkler Repair falls into one of the above categories.

CMG Services all of Central Oklahoma including: Oklahoma City, Norman, Moore, Edmond, Del City, Tuttle, Blanchard, Newcastle, Purcell, Midwest City, Yukon, Mustang and all surrounding areas.

This concludes ,” CMG – 20 Years of Sprinkler System Repair.”

CMG Sprinklers and Drains 405-226-0629

Sprinkler Repair, Oklahoma City, Norman, Edmond, Yukon, Mustang

CMG Sprinklers and Drains — In business since 1993.  Servicing all of central Oklahoma, Including: Oklahoma City, Norman, Moore, Edmond, Midwest City, Del City, Blanchard, Newcastle, Mustang, and Yukon.  We Install Drainage Systems that utilize French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.  CMG also provides the best Sprinkler System Installation and Sprinkler Repair.

Our most recent Sprinkler System Installation was in East Oklahoma City.  It was a Five Zone Sprinkler System.  The Sprinkler Heads were Rain Bird 5004s with Rainbird 4inch Popup Sprinkler Heads in the flower beds.  The Controller was a Hydro-Rain Sprinkler Controller with a Rain-Freeze Sensor attached.  The Sprinkler System Installation took two days.

CMG Sprinkler and Drain   — CMG has installed Lawn Sprinklers in Edmond and all of Central Oklahoma since 1993.  Typically we install Rain Bird Lawn Irrigation Systems but will install all other major brands at customers request.

Recently we installed a seven zone Rain Bird Sprinkler System near Penn and 172 nd  st.   We installed Rain Bird 5004 model Sprinkler Heads along with a Rain- Freeze Sensor.

The Lawn Irrigation System took two days to install.    More fun in the sun on a hot day.

If you are tired of dragging hoses around trying to keep your yard alive, consider a Lawn Sprinkler System Designed by CMG.

We service all of Central Oklahoma including: Edmond, Norman, Moore, Yukon, Mustang, Newcastle, Del City, Midwest City, Oklahoma City, Purcell, and Blanchard.

We also Specialize in French Drains and Surface Drains and all types of Drainage Systems.  If you need a channel drain installed across a sidewalk or a metal grate put in a driveway, Give us a call.

405-226-0629

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler Systems Repairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or French Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Please leave a comment at the bottom if you like.

Blane Callen

 

Sprinkler Repair Information, French Drain Installation

Sprinkler Repair —  Sprinkler InstallationAgnie’s List Award winner

Sprinkler Repair for all types and brands of Residential Sprinkler Systems

Lawn Sprinkler Repair is one of our areas of expertise.  We can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking  Sprinkler Pipes

4.  Shorted or disconnected valve wires

5.  Sprinkler Zones or Sprinkler Stations that won’t work

6.  Broken Sprinkler Heads

 

CMG Sprinklers and Drains can help if you need to re-design your sprinkler systemIf for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

CMG Sprinklers and Drains started 2015 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not too small.  CMG can install Sprinkler Systems with Pumps as small as 3/4 horse.   We also install Sprinkler Systems connected to any standard residential water meter up to two inch.

Sprinkler Valve installation in Edmond

Sprinkler Valve installation in Edmond 

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Back-Flow Valve installation in Norman

Back-Flow Valve installation in Norman 

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.  If it was installed by CMG, then you call us.  A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

Surface Drain installed in Oklahoma City

Surface Drain installed in Oklahoma City 

CMG also installs Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.

405-226-0629                        cmgsprinklers@hotmail.com   or cmgsprinklers@gmail.com

Sprinkler Repair in Oklahoma City, Central Oklahoma

Winter is a time when a lot can go wrong with a Sprinkler System.  Sprinkler Pipes can freeze and break.  Sprinkler heads can crack or bust.  Above Ground Back-Flow Valves can crack or leak during some some of the warmest winters.  CMG can fix all the above Sprinkler System Problems and much more.  If you are having trouble with your Sprinkler Controller, or if you have a Sprinkler Head shooting out in the street, give CMG a call.

If you just have a question concerning your existing sprinkler system or are considering a new one, we are happy to share time and information with you!

CMG Sprinkler and Drain Provides Expert Sprinkler System Repair for all of Central Oklahoma.  Lawn Irrigation  &Sprinkler Repairs for a large part of Oklahoma.

CMG has Installed New:   Sprinkler Valves in Edmond

Rain/Freeze Sensors in Oklahoma City

Sprinkler Controllers in Yukon

Sprinkler Heads in Norman

Sprinkler Nozzles in Moore

ALONG THE WAY WE HAVE ALSO:

Fixed broken Sprinkler Pipes in Mustang

Traced and Replaced bad Sprinkler Wire in Purcell

Replaced Broken Sprinkler Heads in Blanchard

Adjusted Sprinkler Heads spraying in the wrong place in Oklahoma City

Of course we have made thousands of different Sprinkler Repairs in different Cities locally.

CMG also installs Sprinkler Systems.

CMG Sprinklers and Drains —

Lawn Irrigation Systems installed by CMG are fully automatic.  Sprinkler System Controller in the garage or outside on an exterior wall.  The Sprinkler Controller need only be installed be plugged into a 110 electrical outlet.

Our Sprinkler Systems are Self-Draining.   The Sprinkler Pipes Drain underground when the Irrigation System is turned off.   Nothing needs to be done to prepare your Irrigation System for winter except turn it off.  There is no water left in the Sprinkler Pipes to Freeze.

CMG Sprinklers and Drains — Servicing Central Oklahoma including:  Oklahoma City, Moore, Edmond, Norman, Midwest City, Del City, Mustang, YukonBlanchard, Newcastle, and Purcell.

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler SystemsRepairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or  French Drain Installation.  I prefer that the customer pay me when the job.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the Same Zone? –

Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the same zone?

 

Angie’s List Customer Service Award Winner        Activerain Member

 

Sprinkler Installation —  Typically Sprinkler Systems have two types of Sprinkler Heads.  You have Rotor Sprinkler Heads and Pop – Up Sprinkler Heads.

These two types of Sprinkler Heads should not be in the same Sprinkler Zone Together.  The reason is that they water at different rates.  The Pop-Up Sprinkler Head is a Continuous Spray Head.  It does not move or rotate.  It covers a small area and puts a lot of water down fast.  The Rotor Sprinkler Heads cover a much larger area and spray back and forth from left to right.  They take a greater amount of time to completely water their designed area.  If Pop-Ups and Rotor Sprinkler Heads are put in the same zone together and run at the same time, by the time the Rotor Sprinkler Heads are finished,  the area covered by the Pop-Up Sprinkler Heads will be Flooded.  This can kill whatever the Pop-Up Sprinkler Head is intended to water.

 

Many times ” Fly – By – Night Sprinkler Companies”  or, ” DIY Home owners who don’t know any better,” Put Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the same zone.

 

IT IS A BIG MISTAKE!

 

CMG Sprinklers and Drains Installs Sprinkler Systems, Drainage Systems ( French Drains, Surface Drains), and Provides Expert Sprinkler Repair.

Check out our Photos of French Drains,  Photos of Sprinkler Systems,  Photos of Sprinkler Repair, and Photos of Drainage Systems at out PhotoLibrary.

Customer Service Award Winner on Angie’s List

 

Sprinkler Repair Experts For Central Oklahoma –

Sprinkler Repair Experts for Central Oklahoma

 

Angie’s List Customer Service Award Winner        Activerain Member

 

Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 

If you have questions about Sprinkler Repair  please send an E-mail to cmgsprinklers@gmail.com