Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Home » Posts tagged 'Lawton Oklahoma Sprinkler Repair'

Tag Archives: Lawton Oklahoma Sprinkler Repair

Sprinkler Pipe Repair, Oklahoma City, Norman, Edmond, Yukon, Lawton

Repairing a Broken Sprinkler Pipe can be tricky.   In the picture above, a Sprinkler Pipe had been punctured with a landscaping stake.  The Pipe was in a group of pipes together.  They had originally been burred in one trench along with the sprinkler valve wires.  Accidentally a landscaper drove a stake into the ground and hit the pipe.  The stake went between the two top pipes and hit the one on the bottom.  Yikes!

The top pipes were fine but the one underneath leaked like crazy.  Had it been the other way around with the damaged pipe being the one on the top.  The Sprinkler Pipe Repair would have been much easier.  The bad part with the hole would simply been cut out and replaced with a ” Quick Fix” which is a piece of pipe that expands just like a ” Telescope.”  You glue each end and fill the space that was cut out.

Oklahoma Drainage and Sprinkler Repair has been solving Sprinkler Repair problems like this since 1993.  It is this experience that lets us know that a “Quick Fix,” Pipe splice will not work when the pipe is on the bottom of a group of pipes.  It is too hard to expand the Quick Fix, to repair the leak.  It takes a decent amount of force to expand.  In this situation, it is too awkward to install it correctly.  It will leak a little on one end or the other.

Our solution is “Old School.”  We Do a “Box Out,” to repair the broken Pipe.  It is exactly like it sounds.  We cut out the bad pipe and put in New Sprinkler Pipe by running pipe out a few inches, up a few inches, and back to the pipe as shown in the picture above.  This is how broken Sprinkler Pipes were repaired before Quick Fix Splices existed.

Box out Repair

Boxing Out to Repair a Broken Sprinkler Pipe on the Bottom.

Sprinkler Repair, Moving Sprinkler Valves, Oklahoma City, Norman, Edmond, Lawton

Moving Sprinkler Valves

Recently we had a Sprinkler Repair Customer in Oklahoma City,  He was wanting to have his landscape company install a new tree in his flowerbed.  The problem was that his Sprinkler Valves were right where he wanted to plant the tree.  The addition problem was that he had several Sprinkler Valves tightly grouped together so they could not be moved individually.  The landscaping company had dug around the valves in an attempt to move them.  It turned into a real mess.  They cracked a pipe in the process and water and dirt mixed to make mud.  Which then was allowed to dry around the valves.  What a mess!

The only option was to replace the Sprinkler Valves and at the same time move them to a new location.

First we had to put together the new valves in a tight setting so they could fit in the new valve box that we would Install the Sprinkler Valves in.

Take a look at the picture above.  You may notice that for some strange reason we left the Sprinkler Valves sitting up on there side.  Actually there is a very important reason to do this.  Once the Sprinkler Valves are glued together with “Hot” Glue,  if the group of valves is just laid flat to dry, you will have a big problem.  The excess glue in the pipes will run up inside the valve and cause damage to the Sprinkler Valve.  When putting fittings on a Sprinkler Valve they must be placed so that excess glue will run away from the valve.

The Sprinkler Valves can have all kinds of problems and may not work at all form the beginning.  Since 1993 I have cut out and replaced literally thousands of Sprinkler Valves that had glue up inside them.  Many “Fly By Night” landscaping companies that also work on Sprinkler Systems make this mistake constantly.  I have even seen experienced Sprinkler Repair Companies make this mistake as well.  They get in a hurry and make mistakes.  They should know better.

After assembling the Sprinkler Valves and moving them to a new location out of the flowerbed, we tested the Sprinkler Valves thoroughly.

Now our Sprinkler Repair customer has a new tree in his flowerbed.

Oklahoma Drainage and Sprinkler Repair has been providing Expert Sprinkler Repair since 1993.  We service all of Central and Western Oklahoma.

 

Sprinkler Repair, Frost Free Faucet Installation, Altus, Lawton, Norman

Sprinkler RepairSprinkler ValvesSprinkler HeadsLeaking Pipes – Everything you might need repaired or adjusted with your sprinkler system.

Oklahoma Drainage and Sprinkler Repair – On the Job since 1993 – Servicing Western and Central Oklahoma

 

 

Frost Free faucet

Frost Free Faucet connected to Sprinkler Feed Line

Oklahoma Drainage and Sprinkler Repair has been providing expert sprinkler repair  and installing French Drain Systems since 1993 for all of Central and Western Oklahoma.

If you would like to schedule an appointment or have a question, Call or Text to 405 203 9419

  Or E Mail to frenchdrain.sprinklerrepair@gmail.com

Water Line Connections can be a trouble spot for Sprinkler Systems.  Water Line Sprinkler Repair is a focus for Oklahoma Drainage and Sprinkler Repair.  It is very common to have a continuous leak at the connection where the water line connects into the sprinkler system.  This connection takes a lot of stress every time the sprinkler system turns on or off.  It Is called, ” Water Hammer.”  It can cause pipes to crack or break resulting in major Sprinkler Leaks.

Oklahoma Drainage and Sprinkler Repair provides the necessary experience and “Know How,” to ensure that the water line connection will last and won’t break or leak in the middle of the night.

If you have sprinkler valves that look like this,  Your sprinkler system won’t work well, if at all.

Sprinkler Valve Installation takes “Experience” and “Know How”.  Oklahoma Drainage and Sprinkler Repair has installed thousands of new sprinkler valves.

two new valves

New Sprinkler Valves Installed in Edmond

We install the three main brands of Sprinkler Valves.  We can provide new Rainbird, Hunter, or Toro Sprinkler Valves.  Other brands of Sprinkler Valves are also available.

The Above picture shows new valves installed in Edmond, where the old bunch of Sprinkler Valves were cut out and replaced with new ones.  Sprinkler Valves should never be installed very closely together unless that is your only option.  The reason is that they are very hard to fix and replace.  If you have 4 Sprinkler Valves very closely connected then if one goes bad you have to cut out all 4 and replace them all.  Its a lot of waste.  If the valves are separated then replacement and repair is very easy.

 

Sprinkler Repair, Lawton, Broken Sprinkler Heads, Leaking Sprinkler Valves, Emergency Service

Broken Sprinkler Head in Moore Oklahoma

 

 

If you have a Lawn Irrigation System that is not working correctly, Oklahoma Drainage and Sprinkler Repair can provide expert Sprinkler System Repair.

We can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5.  Sprinkler Zones or Sprinkler Stations that won’t work

6.  Broken Sprinkler Heads

The Sprinkler System Problems listed above are the most common Sprinkler Problems that we deal with.

Oklahoma Drainage and Sprinkler Repaircan help if you need to re-design your Sprinkler System.  If for example you are adding a swimming pool in your back yard, we can move the Sprinkler Heads and Sprinkler Pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

 

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

We service all types of residential sprinkler systems.  If you have a Sprinkler Zone or Station that isn’t working, or if your backflow valve leaks, we can help.

We service all of Central Oklahoma including Oklahoma City, Edmond and Norman.  Now we are expanding to include Western Oklahoma including Lawton and Altus.

Before the start of 2019 we provided:

331 Sprinkler Repairs in Norman

704 Sprinkler Repairs in Oklahoma City

251 Sprinkler Repairs in Edmond

114 Sprinkler Repairs in Moore

Numerous Sprinkler Repairs in Central and Western Oklahoma

Before we replaced the valves

After the valves were replaced

 

Oklahoma Drainage and Sprinkler Repair –  Have your seen something like this in your yard?

We service all sprinkler head problems.  If the top of your sprinkler Head has weed eater damage, we can install a new one for you.  If your sprinkler head is working OK but is spraying in the wrong place, we can adjust them too.  If something changes in your yard and a sprinkler head needs to be moved to a better location, it’s no problem.

Experience counts with sprinkler repair.  It is very easy to waste time and money.  There are many mistakes that can easily avoided.  We recently took over a sprinkler repair in Moore from another sprinkler repair company.  The customer had spent a large amount of money replacing their Sprinkler Valves because nothing was working.  We showed up and discovered that the ground wire in the sprinkler controller had accidentally plugged into the zone one outlet.  It took us 30 seconds to fix the problem.

Oklahoma Drainage and Sprinkler Repair has provided Expert Sprinkler Repair for broken sprinkler heads like the one shown above for over 25 years.

 

 

 

Above ground Back Flow Valves many times have problems.  They easily freeze and break during the winter.  When they break, they leak, and usually its a lot of water.  Oklahoma Drainage and Sprinkler Repair has replaced them since 1993.  We also can provide solutions to keep back flow valves from freezing in the first place.

 

 

Sprinkler Valves are a source of Sprinkler Problems.  Sometimes they stick open and won’t shut off.  Even if you turn off or unplug the sprinkler controller.  Other times a sprinkler valve won’t come when its suppose to.  Oklahoma Drainage and Sprinkler Repairhas decades of experience adjusting or replacing sprinkler valves.

Emergency Service 

Oklahoma Drainage and Sprinkler Repair 405 203 9419

If you just have a question concerning your existing sprinkler system, we are happy to share time and information with you!

Water leaking anywhere in your yard

Sprinkler System won’t shut off

Back Flow Valve has frozen and broken

Any other Emergency Concerning Water Lines or Sprinkler Systems

Keeping a Sprinkler System running smoothly requires repair and maintenance.  Needs change and sometimes sprinkler heads need to be moved or the spray needs to be redirected or adjusted.  Sometimes additional sprinkler heads need to be added to an area or sprinkler zone.  Don’t even get me started on sprinkler controllers.  There are so many types and brands of sprinkler controllers.  It is easy to feel lost or confused trying to deal with all the features and adjustments.

New Rainbird Sprinkler Head

Emergency Sprinkler Repair Service Drainage SystemsFrench Drains Surface Drains Sump Pumps  Scheduled Sprinkler Repair

Servicing Central Oklahoma including: Oklahoma City, Norman, Edmond, Midwest City, Del City, Yukon, Mustang, Moore, Norman, Purcell, Newcastle, Blanchard and surrounding areas.  For an additional charge we will travel outside Central Oklahoma.

Emergency Sprinkler Repair ServiceAvailable After Hours and Weekends.

Some times bad things go wrong with sprinkler systems at truly the wrong time.  If you have water shooting up in your yard and running down the street, give us a call.  If your ” Above Ground Back Flow Valve” has frozen and is leaking water everywhere, we can help.

 

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

 

Lawn Sprinkler Systems develop problems and need maintenance from time to time. Oklahoma Drainage and Sprinkler Repair can help with small sprinkler problems such as a broken sprinkler head or a sprinkler controller programming problem.  We also deal with larger sprinkler problems like redesigning sprinkler zones or replacing sprinkler valves.

 

We also provide sprinkler systems checkups to test your irrigation system for possible problems that you may not be aware of. Oklahoma Drainage and Sprinkler Repair can help with:

Broken Sprinkler Head took about an hour to fix.

Oklahoma Drainage and Sprinkler Repair — 405 203 9419

Do you have water running down the street from your sprinkler system in the middle of the night?  Has your Sprinkler “Back Flow Valve” frozen from cold weather and is shooting water everywhere? Is your sprinkler system running and won’t shut off no matter what you do?  Do you need help “After Hours” or on ” Weekends”?  Give us a Call!

Oklahoma Drainage and Sprinkler Repair now services all of Western and Central Oklahoma.

Many times “Above Ground Back Flow Valves” Freeze and Break.  We provide expert Sprinkler Repair for all Sprinkler System Problems.

 

 

 

 

 

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking Pipes

4.  Shorted or disconnected valve wires

5.  Sprinkler Zones or Sprinkler Stations that won’t work

6.  Broken Sprinkler Heads

The above are the most common problems that we deal with.

Oklahoma Drainage and Sprinkler Repair- can help if you need to re-design your sprinkler system.  If for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

Replacing Broken Wiring inside Sprinkler Controller

Replacing Broken Wiring inside Sprinkler Controller

Sprinkler Repair, French Drains, Oklahoma City, Lawton, Drains, Drain Repair

Oklahoma Drainage and Sprinkler Repair –  Have your seen something like this in your yard?

We service all sprinkler head problems.  If the top of your sprinkler Head has weed eater damage, we can install a new one for you.  If your sprinkler head is working OK but is spraying in the wrong place, we can adjust them too.  If something changes in your yard and a sprinkler head needs to be moved to a better location, it’s no problem.

Experience counts with sprinkler repair.  It is very easy to waste time and money.  There are many mistakes that can easily avoided.  We recently took over a sprinkler repair in Moore from another sprinkler repair company.  The customer had spent a large amount of money replacing their Sprinkler Valves because nothing was working.  We showed up and discovered that the ground wire in the sprinkler controller had accidentally plugged into the zone one outlet.  It took us 30 seconds to fix the problem.

Oklahoma Drainage and Sprinkler Repair has provided Expert Sprinkler Repair for broken sprinkler heads like the one shown above for over 25 years.

 

 

 

Above ground Back Flow Valves many times have problems.  They easily freeze and break during the winter.  When they break, they leak, and usually its a lot of water.  Oklahoma Drainage and Sprinkler Repair has replaced them since 1993.  We also can provide solutions to keep back flow valves from freezing in the first place.

 

 

Sprinkler Valves are a source of Sprinkler Problems.  Sometimes they stick open and won’t shut off.  Even if you turn off or unplug the sprinkler controller.  Other times a sprinkler valve won’t come when its suppose to.  Oklahoma Drainage and Sprinkler Repair has decades of experience adjusting or replacing sprinkler valves.

 

Broken Sprinkler Head took about an hour to fix.

 

 

FRENCH DRAINS AS PART OF A DRAINAGE SYSTEM OR BY THEMSELVES

A  French Drain can be a part of a Drainage System or can stand alone.  A Drainage System is made up of one or several types of Drains connected in sequence moving down hill toward an exit or release point.  What makes up or determines the recipe of a Drainage System depends on the “Drainage Diagnosis.”  Every Drainage System is unique to some degree.

French Drain Trench Going Under Sidewalk

French Drain Trench Going Under Sidewalk

For Example, A four inch French Drain may run across a hillside, transition to solid 4 inch Solid Drain Pipe while running under a sidewalk, then connecting into a 12 inch Surface Drain in a low spot,  Solid Drain Pipe then could continue to a garage foundation where the Solid Drain Pipe changes back to 4 inch French Drain again and runs along the foundation for say 60 feet.  Next the French Drain changes again to 4 inch Solid Drain Pipe and continues under a fence to a Pop-Up Emitter which is the exit point.  This again is just one example of a Drainage System with 2 French Drains and one Surface Drain being the main parts.  This would be considered a “Complex Drainage System.”

A simple Drainage System might be a 6 inch French Drain running along a driveway, turning slightly and changing to 6 inch Solid Drain Pipe and continuing to a Curb Fitting as an Exit Point.

French Drain Installation, Surface Drain Installation, Drainage System Installation

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

FRENCH DRAIN DESIGN

French Drain Design must take into account many variables.  One consideration for a French Drain that many times is missed, is the type of soil.  French Drain Design must take into account the type of soil that the French Drain runs through.  If the soil is “Tight or made up of Clay, A French Drain Liner may not be necessary.  The Gravel or Limestone that is used to fill the French Drain trench may be all that is needed to maintain the integrity of the trench over time.   This means that dirt will not mix in with the French Drain Gravel and clog it up over time.  This is not the case however if your soil is sandy or loose.  A Trench Liner should be used to prevent this type of soil from moving into the gravel of the French Drain.  Trench Liners are relatively inexpensive and are not hard to install.  If you are not sure what to do then install the Trench Liner in the French Drain.

Determining  the size of the French Drain Pipe can be difficult.  If the French Drain is not very big and has no Gutter Down-Spouts or Surface Drains connected to it then 3 inch or 4 inch French Drain Pipe may be used.  If the French Drain is large or has many gutters or Surface Drains connected into it, then you should use 6 Inch French Drain Pipe or larger.

French Drain Pipe Installation

French Drain Pipe Installation

French Drain Design is also determined by the Problem Drainage Area.  If water is moving into the Problem Drainage Area underground (Sub-Surface), then installing a French Drain is a “Must!”  French Drains can move Sub-Surface water as well as Surface Water.  Surface Drains can only move Surface Water.  This is why French Drains do such a good job protecting driveways, sidewalks, and foundations.

Oklahoma Drainage and Sprinkler Repair installs French Drains and Drainage Systems in all of Central Oklahoma including:  Oklahoma City, Norman, Edmond, Moore, Mustang, Yukon, and Midwest City.

Oklahoma Drainage and Sprinkler Repair 405 203 9419

French Drain Installation —   French Drains are designed to do a lot of things.  If you have an area that has unwanted water standing in it or running across it, a French Drain can be the answer.  A French Drain is a trench that runs across the Drainage Problem Area.  A French Drain Pipe is placed in the bottom of the trench.  The French Drain Pipe is perforated with thousands of small holes.  In most cases the Drain Pipe has a nylon soc around the pipe to act as a filter for the French Drain.  The French Drain trench is then filled with some type of small rock or stone.  We typically uses crushed 1 inch Lime Stone to cover the French Drain Pipe.  The dirt that was dug out of the trench is taken away or spread out around the French Drain.  The Lime Stone replaces the dirt and fills the French Drain Trench all the way to the surface.

Oklahoma Drainage and Sprinkler Repair 405 203 9419 — We provide:

    French Drain Installation, Surface Drain Installation, Drainage System Installation

    Sprinkler Repair for all aspects of Residential Sprinkler Systems

    Emergency Sprinkler Repair Service, AFTER HOURS AND WEEKENDS.

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Repair, with 26 years of experience. 

Oklahoma Drainage and Sprinkler Repair Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

Oklahoma Drainage and Sprinkler Repair — Installing – French Drains – Surface Drains – Channel Drains – Sump Pumps

Providing Expert Sprinkler RepairBroken Sprinkler Pipes Sprinkler Head AdjustmentSprinkler Valve Replacement

Servicing all of Central and Western Oklahoma since 1993.

When Installing a French Drain as part of a Drainage System, there are many things to consider.

What is the primary source of water coming into the problem drainage area.

Are there secondary sources of water entering the area.

What are they and how many.

How fast does water enter the area and how often.

What are the potential exit points for the water,  Where do we want to take the water too.  Is there more than one potential exit point to increase drainage capacity.

Does the customer want a Drainage System or a Flood Prevention System and does he understand the difference.

 

Oklahoma Drainage and Sprinkler Repair recently diagnosed a Drainage Problem in  South Oklahoma City.  The Home owner had a sump Pump in their basement that was fed from a French Drain outside the Basement Wall.  The French Drain was 14 feet down along the Stem wall of the house.  The French Drain Pipe was cheap and had collapsed.  We brought in a Mini Excavator and dug up the pipe and replaced it with Durable ADS 4 inch perf/soc French Drain pipe.  In the end, we were able to dig up the pipe and Replace it.

CHECK OUT OUR PHOTO LIBRARY!

Photos of French Drains

Photos of Surface Drains

Photos of Channel Drains

Photos of Sprinkler System Installation

Photos of Sprinkler Repair

Sprinkler Repair, Oklahoma City, Duncan, Chickasha, Lawton, Altus, Yukon, Mustang

Sprinkler Heads need lots of attention when you have a sprinkler system.   Sometimes a Sprinkler Head needs to be moved.  Landscaping changes, bad original sprinkler head placement, or you just want to move it.  Oklahoma Drainage and Sprinkler Repair can help.

Sprinkler Heads can Freeze and break in the winter time if your sprinkler runs at a bad time or if In-line sprinkler pipe drains were not installed originally.  Dogs like to chew on them and dig them up. Sprinkler Heads get broken when a car or truck is driven across the yard.  But, the majority of sprinkler head damage is done by weed eaters and lawn mowers.

Oklahoma Drainage and Sprinkler Repair has been fixing broken sprinkler heads since 1993.  If you need a sprinkler head fixed, replaced, adjusted, or moved, we can help.

 

 

Sprinkler RepairLeaking Sprinkler Pipes, Broken Sprinkler Heads, Back-Flow Valve Problems, Moving Sprinkler Heads, Adjusting Sprinkler Heads, Sprinkler Wire Problems, Controller Programming Trouble, Sprinkler Valve Problems.  We do it all.

Oklahoma Drainage and Sprinkler Repair 405 203 9419

 

Oklahoma Drainage and Sprinkler Repair provides Emergency Sprinkler Repair Service, After Hours and Weekends.  405 203 9419

Sprinkler Repair is an ongoing issue for any sprinkler system.  Folks in Central Oklahoma are turning on their Sprinkler Systems and discovering problems.    We fixed several leaks in a Sprinkler System in Edmond.  The sprinkler pipes were leaking in several places.  Each leak had to be cut out and replaced.  The Sprinkler System was fairly new.  It was installed last summer by a Pool Company that also installs cheap sprinkler systems. All the joints in the sprinkler pipes were glued together with clear PVC Cement.  That part is OK, But they cut some corners and didn’t use PVC Primer with the glue.  As a result the joints didn’t bond very well and many of them blew apart this spring when the sprinkler systems was turned on.  (Thus all the leaks)  I suspect we will have to go back several times to fix additional leaks.  We can only warranty the PVC joints that we have replaced.   Cheaper isn’t always better.

Recently we fixed a sprinkler system that was poorly installed.

  The Sprinkler System Company that installed it didn’t know what they were doing.  There was no Master Valve installed in the Sprinkler System.  As a result, The Sprinkler Pipe between the water meter and the Sprinkler Valves stayed pressurized all the time.  This is bad during a cold snap in Oklahoma.  If a Master Valve and In-Line Pipe Drains had been installed originally, there would be no broken pipes when it got too cold.    The Sprinkler Pipes would drain automatically.
sprinkler Drain

Oklahoma City Sprinkler Repair, Sprinkler Head Adjustment, Servicing Lawton, Edmond, Yukon, Norman

Oklahoma Drainage and Sprinkler Repair –  We have provided Drainage Solutions and Expert Sprinkler Repair since 1993.

If you need a Sprinkler Valve Replaced in Moore, or if your Sprinkler Controller is not coming on at the correct time, we can help.  Servicing all of Central and Western Oklahoma.

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We at;Oklahoma Drainage and Sprinkler Repair, take great pride in the Sprinkler Repair Services that we provide.  In almost 26 years of service,We have solved virtually every Sprinkler Repair Problem possible.  We solve Sprinkler Repair Problems that other companies can’t handle.

This week we completed a Sprinkler System, ” Pool-Makeover.”  This is a common situation.  When a home owner installs a new swimming pool, a back-hoe is used to dig the hole for the pool.  Typically the existing Sprinkler System ends up in a pile with several tons of dirt.

Unfortunately,  Oklahoma Drainage and Sprinkler Repair was not the first choice for the home owner on the above mentioned, “Pool Makeover.”  The initial sprinkler company quit after two days.  They could not figure out which pipe went where, or what parts of the sprinkler system needed to be saved or replaced.

WE were called to step in and handle the Extreme Sprinkler Repair.  It took us 4 days but we solved all the Sprinkler System ProblemsThe Sprinkler System now works, and the water coverage is better than before the pool installation.

If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call.

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

Trenching a Sprinkler Systems in Moore Oklahoma
Trenching a Sprinkler Systems in Moore Oklahoma

The above are the most common problems that we deal with.

Oklahoma Drainage and Sprinkler Repair can help if you need to re-design your sprinkler system. If for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard. We can redesign or add-on to sprinkler systems where the home owners needs change.

Leaking Sprinkler Pipes, Servicing Oklahoma City, Norman, Lawton, Edmond, Yukon, Altus

Fixing Leaking Sprinkler Pipes is a common occurrence for Oklahoma Drainage and Sprinkler Repair.  Most recently we had a service call in Lawton.  We got a call from a lady who had water pouring out from under the edge of her driveway.  After shutting off the water at the back-flow valve, we were able to determine that the leak definitely was coming from the sprinkler system.  A cracked sprinkler pipe was the problem and to make matters worse, the sprinkler pipe ran under the driveway.

Oklahoma Drainage and Sprinkler Repair had the solution.  Instead of trying to fix the broken sprinkler pipe, it was a much better idea to replace the entire pipe.  The Sprinkler Repair took about three hours.

 

Oklahoma Drainage and Sprinkler Repair has been solving all types of Sprinkler System Problems since 1993.

We provide:

1.  Sprinkler Valve Problems

2.  Sprinkler Wiring Problems

3.  Sprinkler Controller Problems / Sprinkler Clock Problems

4.  Sprinkler Head Problems

5.  Sprinkler Pipe Problems

6.  Sprinkler Coverage Problems

7.  Sprinkler Redesign Problems for new fences or swimming pools.

 

Many times sprinkler repair needs arise at inconvenient times. Water lines can break in the middle of the night.  Back-Flow Valves Freeze and break at night too.  Sometimes things go wrong when we are away from our homes as well.  Sprinkler Systems coming on at the scheduled times but not shutting off is common and has several possible causes.  Sprinkler Valves can “stick” open while running from lack of water pressure, or is not getting enough electrical current to shut it off from the sprinkler controller, or even a small piece of debris is stuck in the sprinkler valve and won’t allow the sprinkler valve to close.

Edmond Oklahoma Sprinkler Repair, Moving Sprinkler Valves and Sprinkler Heads

Edmond Sprinkler Repair – 

Recently we had a customer in Edmond who had some trouble with a sprinkler head that was leaking at the base.  There was mulch all around the sprinkler head and when the system ran it blew mulch all over the sidewalk.  This is a typical Sprinkler Repair and occurs quite often.  It took us about 15 minutes to fix.  We also moved several Sprinkler Heads that weren’t in the best places.  Moving sprinkler heads is a common practice for Oklahoma Drainage and Sprinkler Repair.

Moving sprinkler valves also is a service that we provide.  It takes a lot more expertise and experience to move sprinkler valves.  There are many reasons that sprinkler valves and sprinkler heads may need to me moved.  Driveways can be added or new landscaping may be installed.  We can redesign any residential sprinkler system Moving Sprinkler Valves, Sprinkler Heads, Sprinkler Pipes, and Sprinkler Wiring is what it takes.

Just like a home or a car, a Sprinkler System requires repair or adjustment from time to time.  We at Oklahoma Drainage and Sprinkler Repair, take great pride in the Sprinkler Repair Services that we provide.  In almost 27 years of service,We have solved virtually every Sprinkler Repair Problem possible.

 

We solve Sprinkler Repair Problems that other companies can’t handle.  If you live in Oklahoma City and have Broken Sprinkler Heads, or if you live in Norman and have Leaking Sprinkler Valves, or if you live in Edmond and your Sprinkler Controller quit working, give us a call or send us an

Lawn Sprinkler Repair is one of our business focuses.   We can help with:

1. Sprinkler Controller Problems

2. Leaking Back-Flow Valves

3. Leaking Sprinkler Pipes

4.  Shorted or disconnected valve wires

5. Sprinkler Zones or Sprinkler Stations that won’t work

6. Broken Sprinkler Heads

The above are the most common problems that we deal with.

 

 

 

 

 

Sprinkler System Repair  Broken Sprinkler Heads — Sprinkler Controllers — Sprinkler Valves — All Brands

Servicing:  Oklahoma City — Norman — Moore — Edmond — Mustang — Yukon — Midwest City — Del City — Blanchard — Newcastle 

AND ALL CENTRAL OKLAHOMA.

Now Servicing Western Oklahoma including Lawton and Altus.

 

 

Oklahoma City Sprinkler Repair, Moving Valves and Sprinkler heads and Sprinkler Controller

Oklahoma City Sprinkler Repair

Recently we helped some folks with their sprinkler controller.  They had a lightning strike melting their sprinkler controller and all the connecting wires. Changing the Sprinkler Controller took a little time, but the larger problem was changing out all the sprinkler wires that ran underground form the controller to the sprinkler valves.  This part took a while and required quite a bit of attention to detail.

SPRINKLER REPAIR IN OKLAHOMA CITY

The sprinkler valve in the picture was replaced by Oklahoma Drainage and Sprinkler Repair. When the Sprinkler Valves were originally installed, they were not put inside a “Valve Box” to protect them. The company that installed them just dumped dirt on them and got paid and left. The Sprinkler System ran ok for about two years before the sprinkler valves failed. We replaced the valves and added a valve box to protect them so this time the Rain Bird valves should last much longer. If you need help with your sprinkler system, give us a call at 405 203 9419. Oklahoma Drainage and Sprinkler Repair has been solving sprinkler problems since 1993.

Oklahoma Drainage and Sprinkler Repair – 405 203 9419

Do you need Sprinkler Repair?

Winter is a time when a lot can go wrong with a Sprinkler System.   Sprinkler Pipes can freeze and break.  Sprinkler heads can crack or bust.  Above Ground Back-Flow Valves can crack or leak even during a warm winter.  Oklahoma Drainage and Sprinkler Repair can help.  Give us a call at :

Sprinkler Controller Trouble Shooting

Having Installed Several Thousand Sprinkler Systems over the past several years, here are the most common mistakes made by homeowners who are not comfortable with their Sprinkler Controller.

Most Sprinkler Controllers have a knob or a digital touch screen.  Either way, the basic functions are the same.

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

1.  Sometimes some brands of Sprinkler Controllers won’t work because the ” Time and Date,” have not been set correctly.  If you select time/date and the screen is blank with no time or date then you have a problem.

*******************************************************************************************************************************

2.  The most common reason that a Sprinkler Controller won’t work is because the breaker has been tripped for the electrical plug that the controller is plugged into.  People assume that because the LED screen on the controller has power that the controller is receiving power.  THIS IS NOT THE CASE!!!!!!!!!!!!!!!!  ALL CONTROLLERS HAVE BACKUP BATTERIES IN THEM TO MAINTAIN THE CONTROLLERS PROGRAMMING IF YOUR ELECTRICITY GOES OFF.  THE BREAKER CAN BE TRIPPED TO THE ELECTRICAL OUTLET AND THE DIGITAL DISPLAY WILL STILL RUN OFF THE BATTERY MAKING IT LOOK LIKE IT HAS POWER WHEN IT DOES NOT.

TEST YOUR OUTLET BY CHECKING YOUR BREAKERS OR PLUGGING SOMETHING INTO THE SOCKET SUCH AS A LIGHT OR A POWER TOOL.

********************************************************************************************************************************

Another very common mistake is that people confuse “Start Times,” with “Run Times” on the controller.

A Run Time is how long you program each Sprinkler Zone to run.

(Zone 1  5 minutes, Zone 2 8 minutes, Zone 3 25 minutes and so on.)  You program how long you want each Sprinkler Zone to run.

A Start Time is a time that you set on the controller to start zone one running.  All other zones automatically follow zone one in order lowest to highest.  Zone 2 knows to always follow zone 1 when it is done.  Zone 3 knows to follow Zone 2 and so on.  Let me repeat this.  Start Times are only for zone 1.  Again, a “Start Time,” is a time that you would like your Sprinkler System to come and run through all the zones.

Sprinkler Controllers have the ability to run more than one start time.  This is to allow your entire Sprinkler System to run more than once in a 24 hour period.  You can have a Start Time of 1 PM.  Zone 1 comes on and runs until its programmed time elapses.  Zone 2 automatically comes on next and runs.  Then zone 3 and so on.  You might have a 2nd Start Time several hours later to start and run your entire system again.  (2nd start time at 8 PM)  The Sprinkler System has had plenty of time to run through all the zones when it started at 1 PM.  At 8 PM the controller turns zone 1 on again and all the zones run their programmed amount of time.  THE MISTAKE PEOPLE MAKE IS THINKING THAT YOU MUST PROGRAM A START TIME FOR EACH ZONE. ( YOU CAN NOT PROGRAM A START TIME FOR ZONE 2,3,4 etc.)  This is also apparent by the fact that most Sprinkler Controllers have a limit of 4 start times but can run more zones than 4.  Most Sprinkler Controllers can run 10 zones or more.

What causes a big problem is a when person programs a Start Time at 1Pm.  Thinking incorrectly that they need to program a Start Time for zone 2.  They enter a second Start Time for 1:15pm, and a third start time for zone 3 at 1:30 PM.  So here is what happens.  Say each zone is programmed to run for 10 minutes each.(Run Time)  Zone 1 comes on and runs at 1 PM.  At 1:10 PM Zone 1 stops and zone 2 comes on.  At 1:15 PM the second start time kicks in and tries to turn on zone 1 again while zone 2 has only been running for five minutes and the other subsequent zones have not run at all.  This is called an “Overlapping Start Time.”  With an Overlapping Start Time, Different brands of controllers do different things.  They are all bad regardless.  Some will run zone one over and over and over causing a flood.  Others will not run at all.

Most people only use or need one Start Time.

********************************************************************************************************************************

The “Water Budget Feature,” found on most controllers can cause problems with your Sprinkler Run Times.  Water Budget is a quick way to quickly change all your Run Times for all your zones at once.  Example  —  Out of the box, your new Sprinkler Controller will be set to 100%.  If you program zone 1 to run 10 minutes and zone 2 to run 15 minutes then if your water budget is 100% then that is exactly what they will run.  If you change your water budget from 100% to 200% now zone 1 will run 20 minutes and zone 2 will run 30 minutes and any other zone’s run time will run double of what it was programmed at 100%.  This is a great feature until you accidentally change your water budget to 900% and don’t realize it.  (or 5%)

IF YOUR RUN TIMES ARE RUNNING MORE OR LESS THAN WHAT YOU PROGRAMMED THEM FOR THEN CHECK THE WATER BUDGET.

********************************************************************************************************************************

Some of the older digital Sprinkler Controllers have an “Enter” button.  Any programming you do must be followed by hitting the Enter Button.  If you don’t hit it then programming that you think you keyed in is lost.  This is why the newer controllers don’t have an Enter Button.