Central Oklahoma French Drains- CMGdrainagesysytems@yahoo.com 405-226-0629

Home » Posts tagged 'Sprinkler Repair'

Tag Archives: Sprinkler Repair

Edmond Oklahoma Sprinkler Repair, Oklahoma City, Yukon, Mustang, More, Norman

For twenty one years, CMG has provided Sprinkler Repair for Central Oklahoma.

Lawn Irrigation Systems require maintenance from time to time.  All types of Sprinkler Repair become necessary.    Sprinkler heads break for several reasons.  Dogs chew up Sprinkler Heads.  Tree roots twist and break Sprinkler heads.  Cars run over and break Sprinkler Heads.  Weed Eaters cut the tops off Sprinkler Heads.  If you have a Sprinkler Head that is not performing perfectly, CMG can help.

Sprinkler Valves can have trouble too.  The Sprinkler Valve Wiring becomes disconnected or shorts out.  Tree Roots can stretch or break the Sprinkler WiresSprinkler Valves can start leaking over time. CMG can solve Sprinkler Valve problems of all types.

The Sprinkler Valves that you see above are a mess.  They were leaking and weren’t working correctly.  We replaced the above Sprinkler Valves with the ones you see below.

Sprinkler System Controllers can cause big headaches for home owners as well.  CMG can install a new sprinkler controller quickly and easily.

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

Sprinkler Controller with Rain/Freeze Sensor in Oklahoma City

CMG recently repaired a Sprinkler System in Blanchard.  We replaced many Sprinkler Heads and fixed broken Sprinkler Pipes.  It took only a few hours to do the work. 

Quality Sprinkler Repair is all about experience.  For twenty years, CMG has:

Replaced Damaged Sprinkler Valves.

Replaced or Adjusted Broken  Sprinkler Heads

Replaced or Reprogrammed Sprinkler System Controllers

Explained Sprinkler Controller Features and Settings

Fixed Broken Sprinkler Pipes

Found and Repaired Broken Sprinkler Wire

Replaced or Adjusted Broken Back Flow Valves

Almost all Sprinkler Repair falls into one of the above categories.

CMG Services all of Central Oklahoma including: Oklahoma City, Norman, Moore, Edmond, Del City, Tuttle, Blanchard, Newcastle, Purcell, Midwest City, Yukon, Mustang and all surrounding areas.

This concludes ,” CMG – 20 Years of Sprinkler System Repair.”

CMG Sprinklers and Drains 405-226-0629

Advertisements

Sprinkler Repair, Oklahoma City, Norman, Edmond, Yukon, Mustang

CMG Sprinklers and Drains — In business since 1993.  Servicing all of central Oklahoma, Including: Oklahoma City, Norman, Moore, Edmond, Midwest City, Del City, Blanchard, Newcastle, Mustang, and Yukon.  We Install Drainage Systems that utilize French Drains, Surface Drains, Channel Drains, Trench Drains, and Sump Pumps.  CMG also provides the best Sprinkler System Installation and Sprinkler Repair.

Our most recent Sprinkler System Installation was in East Oklahoma City.  It was a Five Zone Sprinkler System.  The Sprinkler Heads were Rain Bird 5004s with Rainbird 4inch Popup Sprinkler Heads in the flower beds.  The Controller was a Hydro-Rain Sprinkler Controller with a Rain-Freeze Sensor attached.  The Sprinkler System Installation took two days.

CMG Sprinkler and Drain   — CMG has installed Lawn Sprinklers in Edmond and all of Central Oklahoma since 1993.  Typically we install Rain Bird Lawn Irrigation Systems but will install all other major brands at customers request.

Recently we installed a seven zone Rain Bird Sprinkler System near Penn and 172 nd  st.   We installed Rain Bird 5004 model Sprinkler Heads along with a Rain- Freeze Sensor.

The Lawn Irrigation System took two days to install.    More fun in the sun on a hot day.

If you are tired of dragging hoses around trying to keep your yard alive, consider a Lawn Sprinkler System Designed by CMG.

We service all of Central Oklahoma including: Edmond, Norman, Moore, Yukon, Mustang, Newcastle, Del City, Midwest City, Oklahoma City, Purcell, and Blanchard.

We also Specialize in French Drains and Surface Drains and all types of Drainage Systems.  If you need a channel drain installed across a sidewalk or a metal grate put in a driveway, Give us a call.

405-226-0629

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.  Again some Sprinkler Contractors will cut corners with the Primer.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.  This is another area that some Sprinkler Contractors choose to cut corners.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler Systems Repairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or French Drain Installation.  I prefer that the customer pay me when the job is complete and they are happy with the work.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

Please leave a comment at the bottom if you like.

Blane Callen

 

Sprinkler Repair Information, French Drain Installation

Sprinkler Repair —  Sprinkler InstallationAgnie’s List Award winner

Sprinkler Repair for all types and brands of Residential Sprinkler Systems

Lawn Sprinkler Repair is one of our areas of expertise.  We can help with:

1.  Sprinkler Controller Problems

2.  Leaking Back-Flow Valves

3.  Leaking  Sprinkler Pipes

4.  Shorted or disconnected valve wires

5.  Sprinkler Zones or Sprinkler Stations that won’t work

6.  Broken Sprinkler Heads

 

CMG Sprinklers and Drains can help if you need to re-design your sprinkler systemIf for example you are adding a swimming pool in your back yard, we can move the sprinkler heads and sprinkler pipes to fit the new dimensions of your yard.  We can redesign or add-on to sprinkler systems where the home owners needs change.

CMG Sprinklers and Drains started 2015 with a Sprinkler System installation in South Oklahoma City.  The home owner had well water for the Sprinkler System.  The Well-Pump was a 1 and a half horse Well-Pump.  This size Pump is very good for Sprinkler Systems.  It is not too big and not too small.  CMG can install Sprinkler Systems with Pumps as small as 3/4 horse.   We also install Sprinkler Systems connected to any standard residential water meter up to two inch.

Sprinkler Valve installation in Edmond

Sprinkler Valve installation in Edmond 

When connecting to the Well-Pump, we installed a Back-Flow Valve and a Master Valve.  The Back-Flow valve ensures that water can only flow from the Well to the Sprinkler System.  It can’t flow from the Sprinkler System to the well.  This ensures that the Well Water will stay safe and pure.

Back-Flow Valve installation in Norman

Back-Flow Valve installation in Norman 

Next, we installed a Master Valve.   A Master Valve is always a “Must” for any Sprinkler System.  A Master Valve allows a Sprinkler System to:  1.  Drain Automatically Under Ground.  2.  Makes sure there are no pressurized Sprinkler Pipes EXCEPT WHEN THE SPRINKLER SYSTEM IS RUNNING.  3.  Provides a “Fail-Safe” for the customer if something goes wrong with the Sprinkler System.  If you have water shooting up in the air or have a leak of any kind all you do is turn the Sprinkler Controller to, “OFF”, and it will stop.  If it was installed by CMG, then you call us.  A Master Valve ensures that you will not have water running down the hill while you are waiting for service.  Also, THE WATER GOING TO YOUR HOUSE WILL NOT BE AFFECTED IF THERE IS A PROBLEM WITH YOUR SPRINKLER SYSTEM.  EVERYTHING INSIDE YOUR HOME WILL WORK PERFECTLY.  ( WASHER, DISHWASHER SINK, etc.)

Surface Drain installed in Oklahoma City

Surface Drain installed in Oklahoma City 

CMG also installs Drainage Systems, and provides expert Sprinkler Repair.  If you live in Edmond and need a French Drain, Or if you live in Norman and are having trouble with your Sprinkler System Controller, or if you live in Yukon and need a Surface Drain, Give CMG a Call.

405-226-0629                        cmgsprinklers@hotmail.com   or cmgsprinklers@gmail.com

French Drain, Surface Drain, Drainage System Information

Drainage Systems, French Drains, Surface Drains, Channel Drains, Sump Pumps, Sprinkler Systems, Sprinkler Repair, with 21 years of experience. 

CMG Sprinklers and Drains Recently installed a Drainage System in Nichols Hills.  The Drainage System was made up of a 4 inch French Drain starting in the back yard.  It ran between the garage and the pool.  Several gutters were connected directly into the French Drain.  From this point, we expanded up to a larger 6 inch Drain pipe to handle the added water into the system from the gutters.  In several places the French Drain had to run through areas where Sprinkler Pipes were in the way.  We had to re-rout all the Sprinkler Pipes and Wires under the French Drain.

Once the Sprinkler System had been redesigned and the gutters had been connected, CMG ran the 6 inch Drain Pipe from the end of the French Drain, around the house to release through the curb.  We cut the curb and installed a 6 inch curb fitting with acrylic concrete.  A few days later a major thunderstorm poured down on the property.  The French Drain and the Drainage System Worked Perfectly.

A Channel Drain is a type of Surface Drain and many times is installed in concrete across sidewalks or driveways.  It is long and narrow with a grate on top.

A French Drain is completely different from a Surface Drain.  A basic French Drain consists of a Perforated Drain Pipe in the bottom of a trench.  A  Trench Liner is sometimes used depending on the Drainage System Design and the type of soil.   The Drain Pipe should have a neoprene sock around the Perforated Drain Pipe.   This is to ensure that the Drain Pipe does not become clogged. A trench is dug that is slightly wider than the French Drain Pipe that is being used.  There are several sizes of French Drain Pipe.   Three Inch, Four Inch, and Six Inch are the most common sizes of French drain Pipe. The dirt that is taken out to make the trench is hauled away.  It is replaced by some type of small stone or gravel depending on what is desired or available.  I prefer crushed 1 inch lime stone.  It is the most economical option in my area.  Pea Gravel or some other type of small stone can work just as well.    The lime-stone or gravel is placed in the trench on top of the perforated Drain Pipe and filled all the way to the surface (ground level).   In some cases where the French Drain needs to be deep or is being placed in sandy soil, a special trench liner must be placed in the trench before the perforated Drain Pipe or the Gravel are installed.  This helps maintain the integrity of the trench over time.  It also increases the cost of the French Drain and the amount of time to install it.  I install a trench liner in a French Drain about 20% of the time.  Most of the time a liner in not needed.

A French Drain is designed to handle a large volume of water and cover a large area. The Drain is anyplace the trench goes. It has many applications and can be used in many situations.  It can be installed by itself or incorporated into a Drainage System with Surface Drains or Gutter Down-Spouts connected to it.
The main downfall of a French Drain is that they, for the most part aren’t very pretty.  They don’t look very nice in a yard once they are completed.
Depending on the area the French Drain is installed and the type of grass around the French Drain, will dictate whether grass grows over the lime stone.  Grass can grow up and through the gravel in the French Drain over time eventually covering the gravel.  This is OK.  It won’t have a measurable effect on the performance of the drain.
DONT COVER THE GRAVEL IN THE FRENCH DRAIN WITH DIRT.  THE FRENCH DRAIN WON’T WORK IF THE TRENCH IS CLOGGED WITH DIRT.  DON’T EVEN INSTALL IT IF YOU ARE GOING TO COVER IT UP WITH DIRT.
DECORATIVE STONE CAN BE USED TO COVER A FRENCH DRAIN AND THEY LOOK GREAT AND LAST A LIFETIME.
CMG also installs new Lawn Sprinkler Systems and Repairs Sprinkler Systems.  If you have a broken sprinkler head in Edmond or a leaking Sprinkler valve in Norman, give CMG a call.  We service all types of Sprinkler Systems.

Lawn Irrigation Systems installed by CMG are fully automatic.  Sprinkler System Controller in the garage or outside on an exterior wall.  The Sprinkler Controller need only be installed be plugged into a 110 electrical outlet.

Drain Pipe for French Drain running under sidewalk

Drain Pipe for French Drain running under sidewalk

Our Sprinkler Systems are Self-Draining.   The Sprinkler Pipes Drain underground when the Irrigation System is turned off.   Nothing needs to be done to prepare your Irrigation System for winter except turn it off.  There is no water left in the Sprinkler Pipes to Freeze.

CMG Sprinklers and Drains — Servicing Central Oklahoma including:  Oklahoma City, Moore, EdmondNorman, Midwest CityDel City, Mustang, Yukon, BlanchardNewcastle, and Purcell.

Sprinkler System Installation in Oklahoma can be complicated.   There are many details that very important to ensure that a new Sprinkler System be durable and dependable for many years to come.  Attention to detail makes all the difference when installing a Sprinkler System.  Many times, So-Called, ” Fly By Night Sprinkler Companies,”  cut lots of corners to save money.  Low price should not be the determining factor for having a Sprinkler System installed.  A cheap Sprinkler System soon becomes very expensive if it has to be fixed all the time or won’t work at all.

Two things you should require on any Sprinkler System:

1.  Make shure PRIMER  is used along with PVC Glue when the Sprinkler Pipe is put together.  Primer helps the glue to bond to the PVC pipe.  This ensures that all the pressurized pipe connections won’t leak over time.  I have seen Sprinkler Systems that were no more than a year old that leaked everywhere.

2.  Make shure the connection for the Sprinkler System at the water meter is done with a, “compression T.”  This ensures that no leaks will occur over time at this connection.  The Sprinkler Connection at the water meter is highly stressed every time the Sprinkler System is turned on.  A connection with Glue and Primer will not hold up to the stress over time.  This is why a Compression T must be used.

The above two points are just a few of the details that need to be considered when installing a Lawn Sprinkler System.

For twenty years, CMG has been paying close attention to the important details necessary to ensuring the Installation of Sprinkler Systems that are dependable and will last.

My name is Blane Callen. I have owned and operated CMG Sprinklers and Drains since 1993.  I take great pride in my work.  The Letters “CMG” stand for the first letter of the first name of each of my children.  ( Chance, Melissa, Garrett )  = CMG

I have amassed a great deal of experience designing and installing Sprinkler SystemsRepairing Sprinkler Systems, and designing and installing Drainage SystemsIn the past 19 years, I have made mistakes, but I have learned from them.  As a result I get calls, from time to time,  from other Sprinkler and Drainage companies that have run into a problem that they can’t handle.  I am always glad to help.

I usually don’t take money up front for Sprinkler Installation, Sprinkler Repair, or  French Drain Installation.  I prefer that the customer pay me when the job.  In a few cases on very large jobs I request a draw or outlay for parts.  The parts are delivered from my supplier to the address where the job is being done and equal the amount of the draw.  The parts stay on the premises until they are installed.

 

French Drain Solutions, Surface Drains, Drainage Systems

Drain Pipe for French Drain running under sidewalk

Drain Pipe for French Drain running under sidewalk

CMG Installed a Double Six inch French Drain in Edmond this week.  A Double Six Inch French Drain is two six inch French Drains laid side by side in one very wide and deep trench.  It is designed to move a huge amount of water away from a home.   The CMG customer had several different drainage problems in their back yard.  After a thunderstorm, water would run under their back fence and into their garage.  The back yard was on a steep hillside and the water would run very fast down the hill and into the garage.  CMG installed 2 large six inch French Drains across the water’s path.  This allowed the water to be diverted into the French Drain which then ran through drain pipe to a curb outlet at the street.  Three Gutter Down Spouts were connected into the French Drain.  The French Drain created a protective barrier for the garage.  A 12 inch Surface Drain was also included in the Drainage System.  It was placed up against the driveway and connected with 4 inch Solid drain pipe to the 6 inch French Drain.  Water was completely rerouted away from the home.  A French Drain  and Surface Drain combination in this case was the best solution to this particular drainage problem.

Installing a Curb Outlet for a French Drain in Edmond
Installing a Curb Outlet for a French Drain in Edmond

 

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”  He also checked us out on Angie’s List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.
The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

 

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

 

Problem solved!

Edmond Oklahoma has been the location for many French Drain Installations for CMG in the past several years.  Recently we ripped out an old Surface Drain that was under a deck.  The Surface Drain was too small for the job and did not Protect the Foundation from Standing Water


 The First step was to take out part of the deck along the wall.  Next we took out the Surface Drain and the Three Inch Pipe which was too small.  Digging a trench along the foundation came next.  We had to ensure the, “Fall” to make sure the water would run from left to right. 

 Next a French Drain Liner  needed to be installed.  This was necessary to maintain the integrity of the trench and to keep the French Drain Pipe from filling up with sand and getting clogged over the next few years.  CMG then installed 4 inch ADS Perf/Soc French Drain Pipe along the course of the French Drain.  Next we connected the end of the French Drain Pipe to Solid 4 Inch ADS Drain pipe to continue along the trench to the Pop-Up Emitter at the Exit Point.

Running Drain Pipe to the Curb From French Drain in Back Yard

Running Drain Pipe to the Curb From French Drain in Back Yard

CMG installed a 4 inch French Drain in East Norman this week.  The customer had water standing on the side of his house that was causing foundation damage.  He contracted a Structural Engineer to come out and look at the Drainage Problem and to give him some advise.

Next, our customer went online and found us by searching under, ” Norman Oklahoma French Drain.”  He also checked us out on Angie’s List and Found that we were one of the highest ranked Drainage Contractors in the state of Oklahoma for installing French Drains.The Structural Engineer recommended a French Drain to protect and draw water away from the foundation.  He said that, “he had recommended French Drain Installation to solve similar problems for home owners many times in the past.  The Structural Engineer was confident that it would solve the Drainage Problem.

 

The Gentleman gave us a call to set up an appointment.  CMG arrived on the agreed time and provided a ( Free- No Obligation- Drainage Diagnostic and Quote) We came out and looked at his Drainage Problem and designed a Drainage System to solve his, Standing-Water Problem.”  We also recommended a surface drain in a corner where water was coming off a steep part of the roof and overwhelming the gutter.

The customer let us know that he was ready to move forward.  We scheduled the Drainage System Installation for the following week.  When the scheduled day arrived, we installed the Drainage System.  The Drain was made up of a 6 inch French Drain running 30 feet along the East side of the house.  It curved around the corner of the house.  At that point a 12 inch Surface Drain was connected to the French Drain with 4 inch pipe.  The 6 inch French Drain at that point changed to 6 inch Solid Drain Pipe and continued under ground 65 feet to a pop-up emitter at the curb in the front yard near the street.

Problem solved!

Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the Same Zone? –

Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the same zone?

 

Angie’s List Customer Service Award Winner        Activerain Member

 

Sprinkler Installation —  Typically Sprinkler Systems have two types of Sprinkler Heads.  You have Rotor Sprinkler Heads and Pop – Up Sprinkler Heads.

These two types of Sprinkler Heads should not be in the same Sprinkler Zone Together.  The reason is that they water at different rates.  The Pop-Up Sprinkler Head is a Continuous Spray Head.  It does not move or rotate.  It covers a small area and puts a lot of water down fast.  The Rotor Sprinkler Heads cover a much larger area and spray back and forth from left to right.  They take a greater amount of time to completely water their designed area.  If Pop-Ups and Rotor Sprinkler Heads are put in the same zone together and run at the same time, by the time the Rotor Sprinkler Heads are finished,  the area covered by the Pop-Up Sprinkler Heads will be Flooded.  This can kill whatever the Pop-Up Sprinkler Head is intended to water.

 

Many times ” Fly – By – Night Sprinkler Companies”  or, ” DIY Home owners who don’t know any better,” Put Rotor Sprinkler Heads and Pop-Up Sprinkler Heads in the same zone.

 

IT IS A BIG MISTAKE!

 

CMG Sprinklers and Drains Installs Sprinkler Systems, Drainage Systems ( French Drains, Surface Drains), and Provides Expert Sprinkler Repair.

Check out our Photos of French Drains,  Photos of Sprinkler Systems,  Photos of Sprinkler Repair, and Photos of Drainage Systems at out PhotoLibrary.

Customer Service Award Winner on Angie’s List

 

Sprinkler Repair Experts For Central Oklahoma –

Sprinkler Repair Experts for Central Oklahoma

 

Angie’s List Customer Service Award Winner        Activerain Member

 

Sprinkler Repair is a service that we take a lot of pride in at CMG.  We can solve virtually any problem with a residential or standard commercial Sprinkler System.

Here are some of the standard Sprinkler Repairs that we regularly provide.

 

Fixing Broken Sprinkler Pipes

Repairing or Replacing Sprinkler Valves 

Replacing Malfunctioning Sprinkler Controllers

Adjusting or Replacing Broken Sprinkler Heads

Replacing Broken Sprinkler Wire

Basic Sprinkler System Trouble Shooting

 

If you have questions about Sprinkler Repair  please send an E-mail to cmgsprinklers@gmail.com