Oklahoma Drainage – 405 203 9419

Home » Drainage Problems » French Drain, Drainage Solutions, Leaking Pipe Repair

French Drain, Drainage Solutions, Leaking Pipe Repair

Oklahoma Drainage Systems and Sprinkler Repair

(405) 203 9419 We install all types of Residential Drains and Repair Sprinkler Systems

French Drain Installation

French Drain running from back yard to street

Checking us out!

  • 18,777 hits

 

OKLAHOMA CITY FRENCH DRAIN

Angie’s List Customer Service Award Winner        Activerain Member

French Drain Installation is a primary focus for CMG.  We have 21 years of experience installing all types of Drainage Systems.  French Drains and Surface Drains are the most common.  French Drains when installed correctly, move water faster and in greater volume than Surface Drains.  French Drain installation requires experience and attention to detail for best performance.  CMG provides both.

French Drain With Colored Gravel

French Drain With Colored Gravel

 

 

Oklahoma City is one of the communities in  Oklahoma that CMG services.  We have installed almost a thousand French Drains in the Oklahoma City community in the past 21 years.  Oklahoma City  has many hills and valleys.  Many Neighborhoods are built on hillsides.  This causes many Drainage Problems.  CMG has installed French Drains by themselves and as a part of Drainage Systems to protect Driveways, Sidewalks, Foundations all over Edmond.  French Drains may be installed in Flower Beds or grassy areas too.  French Drains when installed correctly can provide many years of property protection and Piece of Mind.

French Drain in Oklahoma City

French Drain in Oklahoma City

 

CMG has 21 years of experience installing French Drains, and Drainage Systems.  This ensures that a Drainage System that we install won’t have Drain Pipes that are too small, or Surface Drains installed where French Drains Should be placed, or Exit Points that allow water to Stand and become stagnant.  CMG relies on 21 years of experience to Diagnose a Drainage Problem.   Many Drainage Problems are not as simple as they seem.  Understanding why a French Drain should be installed over a Surface Drain in particular situations is just one of many variables that must be considered when Diagnosing a Drainage Problem.

Many times CMG is asked to look at Drainage Systems that aren’t working correctly.  Here are a few common problems that we find:

French Drain Pipe is too small for the Drainage Area.

French Drain is not connected to an Exit Point.

French Drain is installed where a Surface Drain is needed.

Surface Drain is installed where a French Drain is needed.

Too many gutters connected to French Drain.

French Drain covered with dirt.

Exit Point Covered with Dirt.

Water flow is bad for French Drain,  (trying to drain water up hill)

These are just a few of the Problems we are asked to solve when fixing a Drainage System that wasn’t designed correctly.

Drainage Systems can be made up of one drain or a combination of many drains.  Drainage  problems can be very complex.   Complex Drainage Problems may require a combination of several different types of drains all inter-connected and working together.  Other times the drainage problem may be simple and straight-forward requiring only one drain or several of the same type of drain connected together.

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

Cutting The Curb and Installing Curb Fitting With Acrylic Cement

An example of a complex drainage system would be:  A French Drain in the back yard connected to a Surface Drain near a flower bed connected to several gutter downspouts, which are connected to a Channel Drain going across a driveway, which is connected to additional Surface Drain in the front yard, which runs to a Curb Fitting that lets all the water drain out on to the street.

A simple Drainage System might consist of a Surface Drain that is connected to a second Surface Drain which runs to a Pop-up Emitter which lets water drain over the curb and into the street.

An “Exit Point” is the term used for where all the water leaves the Drainage System.  Determining the Exit Point is very critical.  It is one of the first things we do when diagnosing a Drainage Problem.

If you have a question about French Drain Installation contact us.  We will respond ASAP!   Send question to Blane at cmgsprinklers@gmail.com

 


2 Comments

  1. […] Pipes running to many exit points.  CMG Utilizes:  French Drains, Surface Drains, Channel Drains, Trench Drains and Sump Pumps.  The Drain Pipe we use may be  ADS, PVC, or Sewer and Drain Pipe.  Which Drain […]

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.